细纱机主轴轴承装配高效工装的设计 - 各期目次 - 中国纺织器材信息网

细纱机主轴轴承装配高效工装的设计
2018-06-28 10:09:52   来源:   评论:0 点击:

为了提高细纱机主轴轴承的装配质量,缩短安装时间,提升运行稳定性,在传统装配方法的基础上,设计专用主轴轴承扳手及主轴止动规,与先进的数显扭矩扳手配合,组成细纱机主轴轴承高效
陈小辉1,2,闫丽红2
(1.东华大学,上海  201620;2.经纬纺织机械股份有限公司榆次分公司,山西 晋中  030601)
 
摘要:为了提高细纱机主轴轴承的装配质量,缩短安装时间,提升运行稳定性,在传统装配方法的基础上,设计专用主轴轴承扳手及主轴止动规,与先进的数显扭矩扳手配合,组成细纱机主轴轴承高效工装;详细介绍高效工装装配方法,并与传统装配方法进行对比分析。指出:细纱机主轴轴承整体性能取决于其安装质量,主轴轴承装配高效工装的设计使用,确保轴承装配后径向游隙为0.02 mm~0.03 mm,能有效避免轴承损坏,降低停台率和维修用工成本。
关键词:细纱机;主轴轴承;主轴轴承扳手;扭矩扳手;套筒头;主轴止动规;径向游隙
中图分类号:TS103      文献标志码:B      文章编号:1001-9634(2018)03-0023-03
 
收稿日期:2017-10-26
作者简介:陈小辉(1986—),男,甘肃天水人,工程师,主要从事纺织工艺、纺织机械装配设计方面的研究。
 
Design of Efficiency Assembly Tool for SpindleBearing of Spinning Frame
CHEN Xiaohui1,2,YAN Lihong2
(1.Donghua University,Shanghai 201620,China;2.Jingwei Textile Machinery Co.,Ltd.Yuci Branch,Jinzhong 030601,China)
 
Abstract:To improve the assembling quality of spindle bearing of spinning frame with short assembling time for the operation stability,based on the traditional assembly methods,an efficiency assembly tool for spindle bearing is formed with a special wrench and a stop gauge together with advanced digital torque wrench.Detail introduction is made to the efficient tooling assembly method and compared with traditional method.It is pointed out that the overall performance of spindle bearing of spinning frame depends on the quality of its installation.The design and application of efficient assembly tool for spindle bearings ensures the radial clearance of bearing assembly of 0.02 mm to 0.03 mm,effectively avoiding bearing damage,reducing stop rate and maintenance costs.
Key Words:spinning frame;spindle bearing;spindle bearing wrench;torque wrench;sleeve head; spindle stop gauge;radial clearance
 
参考文献:
[1] 阳建宏,黎敏,丁福焰,等.滚动轴承诊断现场实用技术[M].北京:机械工业出版社,2015.
[2] 刘泽九.滚动轴承应用手册[M].3版.北京:机械工业出版社,2014.
[3] 才家刚,李兴林,王勇,等.滚动轴承使用常识[M].2版.北京:机械工业出版社,2015.
[4] 韩法文,张广成,韩绪明.轴承装配及振动故障诊断技术浅谈[J].中国科技纵横,2010(9):31.
 
 

相关热词搜索:细纱机 主轴 工装

上一篇:转杯纺14.8 tex纯棉色纺纱技术探析
下一篇:纺织机械远程运维平台构建应用

分享到: 收藏
评论排行