粗纱工序机械波分析
2015-12-04 15:00:17   来源:   评论:0 点击:

为了稳定控制成纱质量,消除机械波,介绍粗纱工序机械波的分类及产生原因,根据FA423A型粗纱机传动图计算各部件产生机械波的波长,分析了粗纱工序几种特殊机械波产生的原因,提出生产中
贺  梅
(陕西八方纺织有限责任公司,陕西 咸阳  712000)
 
摘要:为了稳定控制成纱质量,消除机械波,介绍粗纱工序机械波的分类及产生原因,根据FA423A型粗纱机传动图计算各部件产生机械波的波长,分析了粗纱工序几种特殊机械波产生的原因,提出生产中消除机械波的预防措施,给出了分析粗纱工序机械波的基本方法及分析过程中的注意事项。指出,要重视对粗纱工序机械波的分析,做到具体观察、分析、跟踪试验,在实践中总结积累经验,达到稳定控制成纱质量的目的。
关键词:粗纱;机械波;假捻波;变周期波;捻度波;波谱图;计算;波长
中图分类号:TS101.91+4    文献标志码:B    文章编号:1001-9634(2015)06-0044-04
 
收稿日期:2015-04-07
作者简介:贺  梅(1975—),女,陕西榆林人,工程师,主要从事棉纺工艺质量研究工作。
 
Analysis of Mechanical Wave in the Roving Process
HE Mei
(Shaanxi Bafang Textile Co.,Ltd.,Xianyang 712000,China)
 
Abstract:In order to stablize yarn quality control,eliminating the mechanical wave,introduction is made to the classification of mechanical wave in the roving process and the reasons thereof.According to the transmission diagram of the roving frame FA423A,the wavelength of the mechanical wave with the parts is calculated. Analysis is done to some special mechanical waves with the roving process,and the precaution is given against the same in the production.Some methods are given in analyzing the mechanical waves in the roving process and the cautions thereof.It is pointed out that seriously attention  should be paid in mechanical wave in roving process.Concrete observation,analysis and following test are needed in experience collection so to have a good control of yarn quality.
Key Words:roving;mechanical wave;false twist wave;wave with variable cycle; twist wave;wave spectrogram;calculation;wavelength
 
参考文献:
[1] 贺梅.FA317型并条机机械波的成因与处理[J].纺织器材,2014,41(1):46-48.
[2] 徐少范.棉纺质量控制[M].北京:中国纺织出版社,2001.
[3] 吴红.浅谈几种特殊机械波的成因及解决方案[J].棉纺织技术,2009,37(4):50-53.
[4] 崔玉梅.波谱图在判断机械故障中的应用体会[J].棉纺织技术,2001,29(3):35-38.
[5] 李友仁.电容式条干仪在纱线质量控制中的应用[M].北京:中国纺织出版社,2006.
[6] 肖国兰.电容式条干仪波谱分析实用手册[M].北京:中国纺织出版社,1998.
[7] 刘运新.纺纱过程中的几种特殊规律波及其分析[J].现代纺织技术,2007(2):40-42.
 

相关热词搜索:机械波 粗纱 工序

上一篇:从卡摩纺导流板的变迁看集聚原理
下一篇:气加压摇架的调节和管理

分享到: 收藏