浅探加压100 N/双锭在高效工艺的实践
2015-02-12 08:45:30   来源：   评论：0 点击：

摘要：以加压为100 N/双锭在高效工艺纺纱的探索为主线，提出了“轻加压、柔控制”的工艺思想，分析其对与之配套的胶圈、胶辊的要求；通过纺纱实践，说明了加压为100 N/双锭纺纱在高效工艺运行具有可行性。指出：上、下胶圈的运行稳定性和同步性以及低硬度高弹性胶辊的应用是纺纱成功的关键，纺纱牵伸理论应与能量守恒定律相结合；轻加压、柔控制思想还需进一步深入探索。
关  键  词:100 N/双锭；高效工艺；轻加压；柔控制；梯式复合型胶圈；低硬度高弹性胶辊
中图分类号：TS104.7⁺9      文献标志码：B      文章编号：1001-9634(2014)01-0042-02
 
收稿日期：2013-10-15
作者简介：殷高伟(1980—)，男，江苏如皋人，助理工程师，主要从事纺织工艺、质量及技术管理工作。
  Abstract: As to the subject of application of the twin spindle on the high efficiency process，the paper puts forth the theory of “light pressure with flexible control”.Analysis is done to the requirement on the cot and the apron in the process. Spinning trials proves the feasibility of the twin spindle 100 N in the high efficiency process. Conclusion is made that the performance stability and synchronization of both the up and bottom apron together with the application of the cot with low rigidity and high elasticity is critical in successful spinning. The draft theory should be combined with  the law of energy conservation. More effort should be put on light pressure with flexible control.
Key  Words: twin spindle 100 N；high efficiency process；light pressure；flexible control； cascading composite apron；cot with low rigidity and high elasticity
 
参考文献：
[1]  殷高伟，张晓方，张瑞杰.一种可提高成纱质量的纺纱机牵伸组件:中国，ZL201010137289.3 [P].2010-04-01.
[2]  殷高伟.浅探梯式复合型胶圈在化纤赛络纺中运用[J].纺织器材，2012，39(4):30-33.
[3]  殷高伟.梯式复合型胶圈的设计与应用[J].棉纺织技术，2010，38(11):27.
[4]  唐文辉，朱鹏.现代棉纺织牵伸的理论与实践[M].北京:中国纺织出版社，2012:121-137.

http://www.ctainfo.cn/uploadfile/2015/0212/20150212084644603.pdf