浅析No363型倍捻机捻度不匀及控制
2014-02-20 15:39:16   来源:   评论:0 点击:

为了降低No363型倍捻机捻度不匀率,分析了捻度不匀率产生的原因,通过工艺参数优选、关键配件的选配、设备的状态维护、加强操作管理等措施,较好地解决了其捻不匀问题,使细号和高档股
高晓峰
(陕西工业职业技术学院,陕西 咸阳  712000)
 
摘要:为了降低No363型倍捻机捻度不匀率,分析了捻度不匀率产生的原因,通过工艺参数优选、关键配件的选配、设备的状态维护、加强操作管理等措施,较好地解决了其捻不匀问题,使细号和高档股线捻度不匀由4.5%降低到2.0%以内,中粗号股线捻度不匀稳定在2.5%以内,生产效率达到98.3%。
关键词:倍捻机;捻度不匀率;锭速;龙带;张力调节;操作方法
中图分类号:TS103.23+4      文献标志码:B      文章编号:1001-9634(2014)01-0042-02
 
收稿日期:2013-05-06
作者简介:高晓峰(1964—),男,陕西户县人,讲师,主要从事纺织工艺的研究与教学。
 
My View on the Irregular Twist Control of the Doubling Twister No363
 
GAO Xiaofeng
(Shaanxi Industry Vocational College,Xianyang 712000,China)
Abstract:In order to reduce the irregular twist of the doubling twister No363,analysis is done to the cause resulting in irregular twist.An good method removing the irregular twist calls for process optimization,selection of key parts,equipment maintenance and operation management,producing an irregular twist drop from 4.5% to 2.0% for the fine and quality plied yarn while the irregular twist of the middle sized plied yarn keeps within 2.5%,production efficiency reaching 98.3%.
Key Words:doubling twister;irregular twist;spindle speed;tangential belt;tension adjustment;operation method
 
参考文献
 [1] 马继忠,薛飞龙,王增红.倍捻机的卷绕成形防叠装置[J].纺织机械,2004(4):8-10.
 [2] 杨建成.倍捻机导丝机构的分析与设计[J].纺织学报,2005,26(5):40-42.
 [3] 孔宪生,陆锡滨,陈卫红,等.HY742型倍捻机的使用体会[J].棉纺织技术,2005,33(6):49-51.
 [4] 崔秀艳.村田络筒机状态维修管理体会[J].棉纺织技术,2007,35(4):51-52.
 [5] 刘光容.HY369A型倍捻机油浴锭座锭子的节能设计[J].棉纺织技术,2008,36(3):53-55.

http://www.ctainfo.cn/uploadfile/2015/0210/20150210103643704.pdf

相关热词搜索:倍捻机 捻度不匀率 锭速 龙带

上一篇:T 11.8 tex强捻纱在络筒工序的生产实践
下一篇:空捻器接头质量的控制和管理

分享到: 收藏