条并卷机夹盘挤坏筒管的解决措施
2023-02-08 14:31:44   来源：   评论：0 点击：

关键词：条并卷机；筒管；棉卷；成卷罗拉；夹盘；法兰；轴承
中图分类号：TS103.22⁺4             文献标志码：B             文章编号：1001-9634(2023)01-0045-02

 
Abstract:In order to solve bobbin crashed by clamp of draw frame and lap machine combined，resulting in sliver leakage，bad cotton lap forming，high quality unevenness of cotton lap and low production efficiency of combing machine，the reasons and adjusting measures for damage of bobbin of draw frame and lap machine combined are analyzed，such as severe wear of bearing of lap roller，too large gap between lap roller and clamp，not reaching set position of upper bobbin，serious wear of clamp and flange，wear of clamp bearing and poor quality of bobbin.It is pointed out that in the production practice，it is necessary to be familiar with the equipment performance，master the debugging skills and operation methods of clamp pressure device and up bobbin loading device，and avoid the damage of bobbin caused by the failure of clamp device of draw frame and lap machine combined through timely replacement of worn bearing，locating flange and selecting qualified bobbin.
Key Words:draw frame and lap machine combined；bobbin；cotton lap；lap roller；clamp；flange；bearing
 
参考文献：
[1] 全国滚动轴承标准化技术委员会.滚动轴承深沟球轴承外形尺寸：GB/T 276—2013[S].北京：中国标准出版社，2013.
[2] 立达(中国)纺织仪器有限公司.立达E32型条并卷联合机操作使用说明书[Z].
[3] 刘允光.条并卷联合机常见故障分析与排除方法[J].棉纺织技术，2018，46（1）：49-53.