高速半自动转杯纺纱机用纺纱器结构设计
2022-03-21 09:54:15   来源：   评论：0 点击：

  关键词：转杯纺纱机；纺纱器；双滚盘；电机；空气轴瓦；Creo Parametric软件；运动仿真
中图分类号：TS103.27⁺1            文献标志码：B            文章编号：1001-9634(2020)05-0009-03
 
收稿日期：2019-12-16
作者简介：吴云珍（1983—），女，山西临汾人，工程师，主要从事产品设计及CAE仿真分析等方面的研究。
  Abstract:In order to improve the rotor speed of domestic semi-automatic rotor spinning frame,combining with the manufacturing technology of Rieter spinning basket R35 and rotor spinning frame JWF1618,the working principle of driving mechanism of high-speed spinning basket is analyzed,the new structure of spinning basket is designed and the three-dimensional model is established.The software of Creo Parametric is used to interference check and simulation analysis of mechanism motion,the rationality of the structural design scheme is verified.It is pointed out that the innovative design of spinning basket for the high-speed semi-automatic rotor spinning frame combining the Rieter spinning basket R35 and the rotor spinning frame JWF1618,it can effectively shorten the designing process,save the designing time and reduce the cost of trial production.The structure of the new spinning basket is driven by indirect bearing with double rolling disks and the motor is driven separately,and the rotor speed can reach 150 kr/min,which can provide the design scheme and technical support of core components of semi-automatic rotor spinning frame under the condition of joint at low-speed and spinning at high-speed.
Key Words:rotor spinning frame;spinning basket;double rolling disks;motor;air bearing bush;Creo Parametric software;motion simulation
 
参考文献：
[1] 汪军.全自动半自动转杯纺纱技术发展和新型纱线开发[J].现代纺织技术,2010(4):14-16.
[2] 黄宗响.工程陶瓷在转杯纺轴承上的应用研究[J].棉纺织技术,2008,36(6):48-50.
[3] S.Weidner-Bohnenberger.新型R60转杯纺纱机：技术上的进步[J].国际纺织导报,2013(7):40-42.
[4] 詹友刚.Creo 3.0运动仿真与分析教程[M].北京:机械工业出版社,2014.