双分梳转杯色纺纱的工艺与性能研究
2022-03-14 16:57:34   来源:   评论:0 点击:

为了充实双分梳转杯纺在色纺纱领域的应用,在双分梳转杯试验机上纺制麻灰粘胶色纺纱,通过直观分析法和配对t检验法,研究混纺比例和喂入通道对纱线断裂强度、断裂伸长率、


李鉴洲a,江   慧a,汪   军a,b
(东华大学 a.纺织学院;b.纺织面料技术教育部重点实验室:上海  201620)

摘要:为了充实双分梳转杯纺在色纺纱领域的应用,在双分梳转杯试验机上纺制麻灰粘胶色纺纱,通过直观分析法和配对t检验法,研究混纺比例和喂入通道对纱线断裂强度、断裂伸长率、条干不匀率和3 mm以上毛羽根数的影响。结果表明:在纤维原料性能相近的情况下,纤维混纺比例对双分梳转杯色纺纱的力学性能、条干性能影响较为平稳,纱线指标无显著差异,但对3 mm以上毛羽根数影响波动较大;不同混纺比例下改变两根条子喂入通道,对最终成纱性能无显著影响。
关键词:转杯纺;双分梳;色纺纱;直观分析法;混纺比例;喂入通道
中图分类号:TS103.2            文献标志码:A            文章编号:1001-9634(2021)04-0005-04
 
收稿日期:2020-10-28
作者简介:李鉴洲(1995—),男,江西吉安人,硕士研究生,主要从事转杯纺技术等新型纺纱方面的研究。
 
Research on the Process and Performance of Double-carding Rotor Colored Spun yarn
LI Jianzhoua,JIANG Huia,WANG Juna,b
(a.College of Textiles;b.Key Laboratory of Textile Science &Technology of
 Ministry of Education,Donghua University,Shanghai 201620,China)
 
Abstract:In order to enrich the application of double-carding rotor spinning in colored spun yarn,gray viscose colored yarns are spun on the double-carding rotor spinning testing machine.The effects of blending ratio and feed channel on breaking strength,breaking elongation,unevenness of sliver of yarns and the number of hairiness above 3 mm are researched with the intuitive analysis method and the paired t test method.The results show that when the properties of the fibrous raw materials are similar,the blending ratio has a relatively stable effect on the mechanical properties and sliver properties of the double-carding rotor colored spun yarns,and there is no significant difference in yarn index,but it has a large fluctuation on the hairiness index;changing the feeding channel of its two slivers under different blending ratios has no significant effect on the final performance of yarns.
Key Words:rotor spinning;double-carding;colored spun yarn;the intuitive analysis method;blending ratio;feeding channel
 
参考文献:
[1] 徐惠君,史倩倩,汪军.纺纱方法的分析与创新[J].纺织器材,2019,46(6):51-54.
[2] 石工.气流纺纱技术的近况[J].纺织服装科技,2010,31(1):30-31.
[3] 郁崇文.新型纺纱技术与设备的发展[J].北京纺织,2004(1):52-55.
[4] 毕大明,章友鹤,赵连英,等.色纺纱工艺技术的创新途径[J].棉纺织技术,2015,43(2):3-6.
[5] 张玉泽.转杯纺双分梳技术研究[D].东华大学,2014.
[6] 张倩.基于双分梳技术的转杯纺混纺工艺研究[D].东华大学,2015.
[7] 惠林涛.双分梳转杯纺技术研究与产品开发[D].东华大学,2019.
[8] 吴芸.立达R35/60转杯纺牵伸工艺优化研究[D].苏州大学,2017.


相关热词搜索:转杯纺 双分梳 色纺纱

上一篇:精梳机钳板开口和给棉技术探讨
下一篇:剑杆织机用凸轮机构设计

分享到: 收藏