转杯纺工艺理论与成纱质量的探讨
2014-02-20 15:43:44   来源:   评论:0 点击:

为了进一步提高转杯纺成纱质量并为其提供理论依据,阐述了转杯纺主要工艺参数与成纱质量的关系,对转杯纺中纤维分离度与分梳质量、缠绕纤维与捻度传递长度以及假捻力矩、假捻捻度、回
张百祥
(东华大学,上海  201620)
 
摘要:为了进一步提高转杯纺成纱质量并为其提供理论依据,阐述了转杯纺主要工艺参数与成纱质量的关系,对转杯纺中纤维分离度与分梳质量、缠绕纤维与捻度传递长度以及假捻力矩、假捻捻度、回转纱条张力、剥离点纱条张力与成纱断头关系等进行理论研究并通过试验进行验证,证明理论研究结果与实践基本相符。指出:转杯纺工艺理论对提高成纱质量、降低断头、稳定生产有一定的指导意义;在实际生产中,须掌握影响成纱质量与成纱断头诸因素之间的关系,并加以灵活运用,才能事半功倍。
关键词:转杯纺;环锭纺;纤维分离度;缠绕纤维;捻度传递;假捻;成纱质量;断头
中图分类号:TS104      文献标志码:A      文章编号:1001-9634(2014)01-0005-07
 
收稿日期:2013-07-15
作者简介:张百祥(1927—),男,浙江嘉兴人,教授,主要从事纺织工程和新型纺纱的研究。
 
Approach into the Rotor Spinning Theory and the Quality of the Resultant Yarn
 
ZHANG Baixiang
(Donghua University,Shanghai 201620,China)
 
Abstract:In order to improve the quality of the resultant yarn and to renew the rotor spinning theory,description is done to the rotor spinning regarding the specification in relation to the quality of resultant yarn.The theoretical approach and test veryfication are done to the spinning process including fiber dispersity,carding quality,the entangled fiber,twist transmision length,the false twist moment,false twist,back sliver tension,the sliver tension at the carding point,and the breakage of the resultant yarn.The theory approach is in conformity with the trial production in gengeral.Conclusion is made that the rotor spinning theory is of help in improving the quality of the resultant yarn,lowering yarn breakage and stablizing the production quality.In the actual production,it is necessary to get the balance of the quality of the resultant yarn and the breakage and such.Flexibility is appreciated.
Key Words:rotor spinning;ring spinning;fiber dispersity;entangled fiber;twist transmision;false twist;quality of resultant yarn;yarn breakage
 
参考文献
 [1] 张百祥,周慈念,梁金茹.转杯纺纱[M].北京:纺织工业出版社,1990.
 [2] 张百祥.针辊在转杯纺中的应用与分析[G].第九届陈维稷优秀论文奖论文汇编.上海:东华大学,2005.
 [3] 张百祥,周慈念,张长乐.气流纺杯内纱条断裂的研究[J].纺织学报,1982(9):6-10.
 [4] 朱梅柱,张百祥.转杯纺纤维分离度与成纱质量关系[J].纺织学报,1991(6):7-11.
 [5] 张百祥,周慈念,张长乐.气流纺杯内纱条剥离点张力的研究[J].华东纺织工学院学报,1983(1):14-21.
 [6] 吴燕明,张百祥,余振汉.转杯纱缠绕纤维对成纱强力的影响[J].中国纺织大学学报,1989(6):26-33.
 [7] 黄选朝,张百祥.气流纺捻度传递长度测试与信号处理的探讨[J].华东纺织工学院学报,1985(Z1):106-115.
 [8] 张百祥,周慈念,童步章.阻捻盘假捻作用的分析[J].纺织学报,1983(10):21-27.
 [9] 张百祥.转杯纺关键部件与成纱质量的探讨[J].纺织器材,2008,35(1):34-40.
 [10] 张百祥.如何利用转杯纱捻度[N].纺织科普,1999-03-20.
 [11] 张百祥.提高转杯纱质量的技术途径[J].上海纺织科技,1995(2):7-10.
 [12] 张百祥.如何降低转杯纱断头[N].纺织科普,1999-04-05.

http://www.ctainfo.cn/uploadfile/2015/0210/20150210105013230.pdf

相关热词搜索:转杯纺 环锭纺 纤维分离度

上一篇:锭子振程简易测试方法
下一篇:加快纺织器材产品创新满足行业发展要求

分享到: 收藏