基于ANSYS Workbench的心轴搬运装置静力学分析
2021-08-20 10:36:41   来源：   评论：0 点击：

  关键词：非织造；卷绕机；分切机；心轴；搬运装置；ANSYS Workbench；有限元分析；模态分析
中图分类号：TS103.7         文献标志码：A        文章编号：1001-9634(2020)S1-0001-04
 
收稿日期：2020-04-09
基金项目：2018年度中国纺织工业联合会科技指导性项目（2018065）
作者简介：杨雷（1994—），男，河南信阳人，硕士研究生，主要从事非织造纺织机械设计及研究工作。

   
Abstract:In order to realize the automatic connection between winding machine and cutting machine in nonwoven production line，the function，mechanism and working process of mandrel handling device are introduced.On the basis of theoretical analysis，the 3D model of the mandrel handling device is established by Solidworks software.After material definition，mesh division and applying conditions by ANSYS Workbench software，the statics finite element analysis and the modal analysis of horizontal and vertical motion mechanisms of the mandrel handling device are carried out.The results show that the maximum stress of the mandrel handling device is far less than the allowable stress，the maximum deformation meets the accuracy requirement of 5 mm for cotton roll handling，the excitation of the horizontal and vertical moving mechanism will not resonate with the own mechanism，and the statics performance and stability of the mandrel handling device meet the requirements of handling operation.
Key Words:nonwoven；winding machine；cutting machine；mandrel；handling device；ANSYS Workbench；finite element analysis；modal analysis

参考文献：
[1] 卢志渊.中国纺织产业国际竞争力现状及提升路径[J].上海纺织科技，2014，42(2):1-4.
[2] 吴伟涛.物流搬运AGV 的总体方案及其关键技术研究[D].沈阳:沈阳理工大学,2013.
[3] 司徒元舜，麦敏青，谭国超.大型高速非织造布分切机的工作原理[J].非织造布,2013，21(3):69-75.
[4] 杨雷,崔江红,杨洪涛,等.一种棉卷自动化搬运装置的结构设计[J].上海纺织科技,2019,47(6):11-13.
[5] 陈艳霞.ANSYS Workbench 18.0有限元分析从入门到精通[M].北京:电子工业出版社,2018.
[6] 阚常凯,曹冲振,张传美,等.基于Workbench的三轴搬运机器人结构设计与模态分析[J].包装工程,2017,38(17):158-162.
[7] 丁欣硕.ANSYS Workbench 14.5有限元分析案例详解[M].北京:清华大学出版社,2014.
[8] 刘晓军,施永强,王伟.基于ANSYS Workbench 的复合齿轮泵啮合齿轮有限元分析[J].煤矿机械,2009(5):52-54.
[9] 段虎明,石峰,谢飞,等.路面不平度研究综述[J].振动与冲击,2009(9):95-101.
[10] 许海,赵淳生.双足型直线超声电机的实验研究[J].机械科学与技术,2007,26(11):1498-1500.