棉精梳机牵伸系统改造
2016-05-24 09:07:02   来源:   评论:0 点击:

为了降低棉精梳机在高速运行时牵伸系统气缸漏气、头胶辊缠花的故障率,提高生产效率,分析牵伸系统出现故障的原因,对牵伸系统的气缸密封、头胶辊自动清洁装置提出了改造方案,并通过
张元朝
(陕西烽火通信集团有限公司,陕西 宝鸡  721006)
 
摘要:为了降低棉精梳机在高速运行时牵伸系统气缸漏气、头胶辊缠花的故障率,提高生产效率,分析牵伸系统出现故障的原因,对牵伸系统的气缸密封、头胶辊自动清洁装置提出了改造方案,并通过实践验证改造方案的可行性。结果表明:改造后的棉精梳机牵伸系统运行稳定、牵伸指标良好、故障率明显减小,能有效提高精梳生产效率,值得推广。
关键词:棉精梳机;牵伸系统;气缸;密封;头胶辊;清洁装置;改造
中图分类号:TS103.22+5    文献标志码:B    文章编号:1001-9634(2016)03-0053-04
 
收稿日期:2015-09-30
作者简介:张元朝(1983—),男,陕西咸阳人,工程师,主要从事纺机研发工作。
 
Modification of the Drafting System on the Cotton Comber
ZHANG Yuanchao
(Shaanxi Fenghuo Communication Group Co.,Ltd.,Baoji 721006,China)
 
Abstract:In order to avoid the troubles with the drafting system such as air leakage in the cylinder and lapping of the first roller and such for high poduction efficiency when the cotton comber is running in high speed,analysis is done to the causes of the trouble occurred.Some modification is done to the cylinder seals and the automatic cleaning device of the first roller.The feasibility of the modification is double proofed,indicating that the drafting system is of stable performance,good drafting index,less troubles,consequently improving the production efficiency.It is worthy of being promoted.
Key Words:cotton comber;drafting system;cylinder;seal;first roller;cleaning device;modification
 
参考文献:
[1] 周金冠.现代精梳生产工艺与技术[M].北京:中国纺织出版社,2006:79.
[2] 陈名均,刘志平,倪斌.SXF1269型精梳机牵伸胶辊清洁器的改进[J].纺织器材,2006,33(5):43-44.
[3] 刘允光,刘云河,谢玉贵.FA261型精梳机牵伸区前胶辊清洁器的改进[J].棉纺织技术,1997,25(11):53-54.
[4] 杨明.论新型棉精梳机牵伸机构缠绕自停装置[J].科技经济市场,2014(6):21.
[5] 陈三庆.精梳双层牵伸胶辊静电绕花原因及解决办法[J].纺织器材,1996,23(3):50-51.
[6] 张元朝,王晓松.一种精梳机牵伸头皮辊的自动清洁装置:中国,CN102425016A[P].2012-04-25.
[7] 王晓松.基于PLC控制的自动清洁器在HXFA299B型棉精梳机上的应用设计[J].自动化博览,2011(7):90-91.
 

相关热词搜索:牵伸 精梳机 改造

上一篇:纺纱电机及其驱动系统的创新发展
下一篇:圆锥形筒子纱自动包装生产线的设计

分享到: 收藏