细纱低硬度胶辊重加压纺纱工艺下机械波成因分析
2015-07-14 09:58:49   来源:   评论:0 点击:

为了研究在重加压纺纱工艺中低硬度胶辊产生机械波的原因,比较了低硬度高弹性胶辊产生机械波的形态,分析橡胶力学性能、胶辊硬度和回弹性与纺纱工艺的对应关系以及机械波产生的原因;
 
(安徽八一纺织器材有限公司,安徽 潜山  246316)
 
摘要:为了研究在重加压纺纱工艺中低硬度胶辊产生机械波的原因,比较了低硬度高弹性胶辊产生机械波的形态,分析橡胶力学性能、胶辊硬度和回弹性与纺纱工艺的对应关系以及机械波产生的原因;指出:胶辊机械波的形成主要是由其应力与变形极不稳定地交替作用所产生;在重加压、强控制纺纱工艺中应根据摇架压力、纺纱速度、纤维品种等技术参数综合选择胶辊。
    词:低硬度;重加压;细纱胶辊;机械波形态;力学性能;弹性恢复;成因分析
中图分类号:TS103.82+3      文献标志码:B      文章编号:1001-9634(2014)05-0016-03
 
收稿日期:2014-01-17
作者简介:文  皖(1950—),男,湖北沙市人,高级工程师,主要从事纺织橡胶产品的设计、开发及市场调研。
 
The Genesis Analysis of the Mech-wave of the Spinning Cot
with Low Rigidity in the Weighting Spinning Process
WEN Wan
(Anhui Bayi Textile Accessories Co.,Ltd.,Qianshan 246316,China)
Abstract:In order to make clear why the mech-wave of the spinning cot with low rigidity is generated in the weighting spinning process,comparison analysis is done to the cot regarding morphology of the mech-wave with the cot.Analysis is done to the cot as to the rubber physical property,the cot rigidity,and the resilience in relation to the spinning process and the genesis of the mech-wave.Conclusion is made that the mech-wave is generated under the alternating action of the instable stress and deformation of the cot.Cots should be selected according to the pressure of the cradle,the spinning speed of the frame,and fiber varieties under the process of weighting and controlled spinning.
Key Words:low rigidity;weighting process;spinning cot;morphology of mech-wave;physical performance;resilience;genesis analysis
 
参考文献:
[1]  文皖.成纱8 cm、9 cm、10 cm连续机械波的成因与控制措施探讨[J].纺织器材,2008,35(6):16-19. 
[2]  文皖.细纱免处理胶辊回磨后条干恶化的成因[J].纺织器材,2011,38(6):29-31. 
[3]  唐文辉.重加压工艺的理论与实践[J].纺织器材,2011,38(6):5-8. 
[4]  欧杯林.胶辊使用选型探讨[J].纺织器材,2012,39(2):35-37. 
 

相关热词搜索:机械波 胶辊 低硬度 重加压

上一篇:新型纺纱用钢领钢丝圈发展趋势探讨
下一篇:再析纺纱时钢丝圈在钢领上位置倾侧

分享到: 收藏