新型细纱牵伸器材的应用实践
2022-11-22 15:22:21   来源:   评论:0 点击:

为了提高纺纱质量,解决新疆棉马克隆值异常偏高、线密度偏大、纤维长度和强度都偏低等问题,简述新疆棉质量指标;详细介绍前区压力棒上销、加长上销和压力棒隔距块的工作原理


周新改,刘  莉,李世平,温亚美
(舞钢市银龙集团 云龙纺织科技有限公司,河南 舞钢  462500)
 
摘要:为了提高纺纱质量,解决新疆棉马克隆值异常偏高、线密度偏大、纤维长度和强度都偏低等问题,简述新疆棉质量指标;详细介绍前区压力棒上销、加长上销和压力棒隔距块的工作原理、结构特点以及工艺调整;通过试验数据对比分析了三者在集聚纺纱不同品种的成纱质量。指出:使用新型牵伸器材可以改善成纱条干CV值,降低细节、粗节和棉结,同时对生产设备和操作管理要求更高;使用压力棒上销时隔距块比普通上销大2档,开车状态和指标相对稳定;在JWF1520型长车上使用加长上销需前移,夹下胶圈问题比较严重,在4806型细纱机短车上使用,开车状态基本正常;平面区域用水滴形压力棒隔距块,过桥齿轮处用压力棒上销,有利于设备调整,锭间差异较为稳定。
关键词:原棉AFIS;HVI;前区压力棒上销;加长上销;压力棒隔距块;质量指标
中图分类号:TS103.82          文献标志码:B          文章编号:1001-9634(2022)05-0025-05
 
收稿日期:2021-12-16
作者简介:周新改(1988—),女,河南舞钢人,助理工程师,主要从事纺纱技术及工艺等方面的工作。
 
 
Application Practice of New Drafting Accessories for Spinning Process
ZHOU Xin’gai,LIU Li,LI Shiping,WEN Yamei
(Wugang Yunlong Textile Technology Co.,Ltd.,Wugang 462500,China)
 
Abstract:In order to improve spinning quality and solve the problems such as abnormally high micronaire value,high linear density,low fiber length and strength of Xinjiang cotton,the quality index of Xinjiang cotton is briefly described,the working principle,structural characteristics and process adjustment of the front zone pressure bar top cradle,the extended top cradle and the pressure bar spacer are introduced in detail.The yarn quality of the three kinds in compact spinning is compared and analyzed by experimental data.It is pointed out that the use of new drafting accessories can improve the yarn evenness CV value,and can reduce fine ends,slubs and neps,and requirements for production equipments and operation management are higher at the same time;the gauge for pressure bar top cradle is two gear larger than the gauge for ordinary top cradle,and the running state of spinning frame and yarn indicators are relatively stable;the extended top cradle needs to be moved forward using in the long spinning frame JWF1520,and the problem of clamping lower apron is serious,and the running state is basically normal using in short spinning frame 4806;the dropshaped pressure bar spacer is used in the plane area,and the pressure bar top cradle is used in bridge gear,which is conducive to equipment adjustment,and the difference among spindles is relatively stable.  
Key Words:raw cotton AFIS;HVI;front zone pressure bar top cradle;extended top cradle; pressure bar spacer;quality index 
 
 
参考文献:
[1] 刘莉,温亚美,贺伟娜,等.新型加长上销的使用效果[J].棉纺织技术,2020,48(3):66-68.
[2] 郑功振.新型压力棒上销应用探讨[J].纺织器材,2008,35(3增):42-44.
[3] 谈士平,赵曙光.使用6839加长碳纤弹性上肖生产细支纱的实践[J].江苏纺织,2011(11):50-51.
[4] 徐有亮,郑志宏,薛少林,等.应用前区压力棒上销的纺纱性能研究[J].陕西纺织,2008(4):18-19.


相关热词搜索:原棉AFIS;HVI

上一篇:细纱机用加长上销的生产实践
下一篇:精梳工序降低针织面料疵点的措施探讨

分享到: 收藏