整经机电气控制系统改造实践
2022-02-16 17:42:03   来源：   评论：0 点击：

关键词：整经机；整经；电气控制系统；计长；密度控制；PLC；信息化
中图分类号：TS103.7          文献标志码：B          文章编号：1001-9634(2021)S1-0006-02
 
收稿日期：2020-12-21
作者简介：张振林（1980—），男，山东淄博人，工程师，主要从事纺织设备的机电一体化管理与技术方面的研究。
   
Abstract:In order to solve the problem that the existing warping electrical control system is simple，and the operation relies on the personnel experience，resulting in the yarn dyeing in difference color both inside and outside，and edge，the current situation of warping machine is analyzed，the transformation plan is made，and the selection of electrical components and the technical reform implementation process of the configuration of touch screen，length measurement，warping density control，PLC programming，informatization and other aspects are elaborated.Through contrast effect，it is pointed out that after modification of warping machine control system using the touch screen control，optimizing detection of electrical components，PLC program control，and information，electricity consumption saves 50%，warping length accuracy，density uniformity and efficiency are improved，and the failure rate is low，the information management level is improved，which can save production cost and labor cost.
Key Words:warping machine；warping；electrical control system；effective length；density control；PLC；informatization

参考文献：
[1] 贝宁格纺织机械有限公司.贝宁格整经机说明书[Z] .
[2] 贝宁格纺织机械有限公司.贝宁格整经机电气图[Z] .·199··200·
[3] 北京昆仑通态自动化软件科技有限公司.昆仑通态触摸屏应用手册[Z] .2020.
[4] 陈忠平.西门子S7-200 SMART PLC完全自学手册[M] .北京:化学工业出版社,2020.应用研究