T9A热轧态钢丝在经编机针上的应用
2015-12-04 15:06:08   来源:   评论:0 点击:

为了使T9A热轧态φ5 50 mm钢丝组织、硬度等指标达到经编机用针原料钢丝要求,经铅浴淬火得到索氏体组织,再拉拔至成品尺寸、优化球化退火工艺。试验结果显示:成品钢丝能满足制针要求,
陆鹏飞,顾  飞
(金轮针布(江苏)有限公司,江苏 南通  226009)
 
摘要:为了使T9A热轧态φ5.50 mm钢丝组织、硬度等指标达到经编机用针原料钢丝要求,经铅浴淬火得到索氏体组织,再拉拔至成品尺寸、优化球化退火工艺。试验结果显示:成品钢丝能满足制针要求,且其工艺流程优于连续球化工艺、生产效率高,钢丝易拉拔,最终产品组织状态不受钢丝球化组织的影响。
关键词:T9A;球化态;热轧态;经编机针;淬火;球化退火;索氏体组织
中图分类号:TS103.82+1    文献标志码:B    文章编号:1001-9634(2015)06-0026-03
 
收稿日期:2015-04-07
作者简介:陆鹏飞(1985—),男,江苏海门人,工程师,主要从事精密特种钢丝研究。
 
The Application of the Hot Rolled Steel Wire T9A in Warp Knitting Machine
LU Pengfei,GU Fei
(Geron Card Clothing(Jiangsu) Co.,Ltd.,Nantong 226009,China)
 
Abstract:In order to orient the hot rolled wire T9A of 5.5 mm in diameter regarding the specifications such as wire structure and hardness with the material for warp knitting machine.The wire is lead bathed and quenched till the sorbite structure arises before drawn to the desired size with ball annealing process.Test results show that the wire can meet the requirements of the system,and the process flow is better than the continuous process,the production efficiency is high,the steel wire is easy to draw,and the final product is not affected by the steel wire ball annealed.
Key Words:T9A;ball state;hot rolling;warp knitting machine needle; quenching; annealing;sorbite structure
 
参考文献:
[1] 吕桂清,张翰文.T9A针丝工艺的改进[J].金属制品,1993(6):1-4.
[2] 夏立芳.金属热处理工艺学[M].哈尔滨:哈尔滨工业大学出版社,2008.
[3] 顾安之.T9A钢丝Ac1以下球化退火工艺的探讨[J].纺织器材,1991,18(2):29-33.
[4] 徐效谦,阴绍芬.特殊钢钢丝[M].北京:冶金工业出版社,2005.
[5] 刘国辅,康厚斌.纺织机针用工具钢带(T9A)的开发[J].特钢技术,1999(4):65-67.
[6] 中国机械工程学会,全国热处理标准化技术委员会.标准金相图谱[Z].
[7] 贺跃辉,谭玉华.对T9A钢件铅浴处理实质的探讨[J].金属制品,1992(2):6-10.
 

相关热词搜索:T9A 热轧态 经编机针

上一篇:涤纶短纤牵伸机轴承失效原因探讨
下一篇:YJ200系列新型细纱弹簧摇架的技术进步

分享到: 收藏