金轮粘结式整体锡林及其应用效果
2015-02-12 08:58:24   来源：   评论：0 点击：

摘要：为了提高精梳条质量并降低生产成本，介绍了两种规格GRJC-E系列粘结式整体锡林的齿形、齿密设计和圆弧齿片制造工艺，即四分割90°齿面圆心角和五分割110°齿面圆心角；重点与格拉夫5014型、7015型整体锡林在E62型精梳机上进行试验对比。认为GRJC-E型粘结式整体锡林具有硬度合理、穿刺能力强、耐磨性好、自洁、久纺不嵌花等特点；与格拉夫公司同类产品相比，清除棉结、杂质和短绒效果理想，具有明显改善棉网均匀度和清晰度、性价比极高的特点。
关  键  词：精梳机；整体锡林；粘结式；齿形；齿密；硬度；耐磨性；棉网；精梳条质量；短绒率；落棉率
中图分类号：TS103.11⁺2     文献标志码：B      文章编号：1001-9634(2014)02-0030-06
  Abstract: In order to improve the quality of the combed sliver with lower cost，introduction is made to the two kinds of the adhesive integrated cylinder GRJC E regarding the wire specification，setting arrangement，and the manufacturing process of the arced wire which is either segmented into four parts with center angle of 90 degree or five parts with center angle of 110 degree. Highlight is made to the comparison with cylinder 5014 and 7015 of Graf make on the combing frame E62.Conclusion is made that the adhesive integrated cylinder from Geron company is of reasonable regidity， good puncturing ability，good abrasion resistance，self-clean， and free fiber jamming in case of long performance. Compared with the Graf product of the same kind，the Geron product is of good cleanning performance of impurity，trash， and short fiber，consequently marked improving the uniformity and definition of the cotton web with high price and performance ratio.
Key  Words: combing frame；integrated cylinder；adhesive design；wire form；wire setting； rigidity；abrasion resistance；cotton web；quality of combed sliver；short fiber rate；noil rate
 
参考文献：
[1]  江苏通裕纺织集团.试纺报告[Z].2012，10.
[2]  常熟棉纺织有限公司.试纺报告[Z].2012，10.
[3]  浙江萧山航民科尔纺织有限公司.试纺报告[Z].2012，11.

http://www.ctainfo.cn/uploadfile/2015/0212/20150212090003933.pdf