​影响络筒机纱线接头质量的因素分析
2024-04-02 16:26:42   来源：   评论：0 点击：

关键词：络筒机；捻接；接头；温湿度；纱线喂入；剪刀；吹风嘴；导纱板
中图分类号：TS103.23⁺6            文献标志码：A            文章编号：1001-9634(2024)02-0005-05
 
收稿日期：2023-11-28
作者简介：田瑞芳（1978—），女，山东菏泽人，工程师，主要从事纺织机械设计及纺纱工艺方面的工作。
   
Abstract:In order to improve the yarn joint quality of winding machine，the comparative spinning test is carried out by using single factor method from the aspects of relative humidity，yarn feeding，scissors state，the angle of air blower nozzle and the consistency of position of spinning plate，etc.，the influence on the spinning joint quality is investigated，and the solution is put forward.It is pointed out that there are many factors affecting the yarn joint quality，which should be based on the actual spinning environment，process，splicing parameter setting，splicer configuration，etc.，to ensure proper temperature and humidity，good condition of yarn feeding，timely maintenance of scissors，normal angle of air blower nozzle，consistent zero position of yarn plate up and down，small surface roughness of yarn guide plate through yarn surface，intact bottom of yarn guide plate and smooth twisting cavity channel.
Key Words:winding machine；splicing；joint；temperature and humidity；yarn feeding；scissors；air blower nozzle；yarn guide plate
 
参考文献：
[1] 王果刚.自络实用技术三百问[M].升级版.杭州：中国纱线网，2021.
[2] 欧怀林.总工谈纺纱：经典问答与专题案例[M].2版.杭州：中国纱线网，2018.
[3] 郁崇文.纺纱学[M].北京：中国纺织出版社，2009.
[4] 姚穆.纺织材料学[M].3版.北京：中国纺织出版社，2009.