钢领与钢丝圈的应用及发展
2022-11-25 16:37:47   来源:   评论:0 点击:

为了提高纺纱质量、减少千锭时断头,介绍了钢领、钢丝圈的型号规格、要求及选配方法;从上机前管理、使用管理、周期管理及日常使用注意事项等方面详述钢领与钢丝圈的精细化管理要求及


侯长勇
(山东聊城华润纺织有限公司,山东 聊城  252000)
 
摘要:为了提高纺纱质量、减少千锭时断头,介绍了钢领、钢丝圈的型号规格、要求及选配方法;从上机前管理、使用管理、周期管理及日常使用注意事项等方面详述钢领与钢丝圈的精细化管理要求及其对纺纱生产的影响;从适应性、配合状态及表面处理等方面探讨提出二者的发展趋势。指出:纺织企业应依据原料、纺纱品种、纺纱号数以及生产实际等合理选配钢领、钢丝圈,并对二者进行精细化管理;制造企业应配套研发钢领与钢丝圈,提高二者的匹配性能,注重提升表面处理技术,以更好地发挥其配套性能,稳定纺纱质量;满足纺纱断头少、成纱质量好的要求,产品适应性强、适用高速纺纱、寿命长等是钢领与钢丝圈的发展方向。
关键词:钢丝圈;钢领;纺纱;产质量;摩擦;纺纱张力;精细化管理;表面处理
中图分类号:TS103.82+2;TS103.81+3          文献标志码:B          文章编号:1001-9634(2022)S1-0025-04
 
收稿日期:2021-12-21
作者简介:侯长勇(1975—),男,山东冠县人,工程师,主要从事胶辊胶圈等器材专件管理方面的工作。
 
Application and Development of Rings and Travellers
HOU Changyong
(Shandong Liaocheng Huarun Textile Co.,Ltd.,Liaocheng 252000,China)
 
Abstract:In order to improve spinning quality and reduce broken ends per thousand spindles,the models and specifications,requirements and selection methods of rings and travellers are introduced.The influence of fine management and its requirements of rings and travellers on spinning production is described in detail from the aspects of pre-production management,use management,cycle management and matters needing attention in daily use,and its development trend is discussed and put forward from the aspects of adaptability,fit state and surface treatment.It is pointed out that textile enterprises should choose rings and travellers reasonably according to raw material,spinning variety,spinning yarn fineness and production practice,and fine management should be carried out on them.Manufacturing enterprises should research and develop rings and travelers correspondingly,improve their matching performance,and pay attention to surface improvement technology,to better play its supporting performance and make spinning quality stable;the development direction of rings and travellers is to meet the requirements of less broken ends,good yarn quality,strong adaptability,high speed spinning and long serive life. 
Key Words:traveller;ring;spinning;yield and quality;friction;spinning tension;fine management;surface treatment
 
参考文献:
[1] 秋黎凤,王可平,赵仁兵,等.圈·领之道:钢领钢丝圈的技术分析、发展与使用[M] .西安:西北工业大学出版社,2017.
[2] 缪定蜀.用好钢领钢丝圈技术初探[J] .纺织器材,2017,44(1):56-61.
[3] 章友鹤,赵连英,陈璟,等.钢领钢丝圈发展趋势与应用[J] .纺织导报,2015(6):59-63.
[4] 刘荣清.钢领钢丝圈对细纱断头和毛羽的影响[J] .纺织器材,2007,34(4):47-51.
[5] 徐学尹,李宝宏.钢丝圈的几点使用体会[J] .棉纺织技术,2012,40(4):50.


相关热词搜索:钢丝圈 钢领 纺纱 产质量

上一篇:钢丝圈应用实践
下一篇:胶辊胶圈使用实践

分享到: 收藏