钢丝圈应用实践
2022-11-25 16:02:56   来源:   评论:0 点击:

为了选好用好钢丝圈、降低钢丝圈损耗并提高纺纱质量,介绍钢丝圈的技术要求、选配原则;对比分析了使用不同钢丝圈纺制集聚赛络纺CJ 14 5 tex纱和CJ 18 2 tex纱的毛羽和断头指标;从使用周期


周海敏,杨红重
(河南新野纺织股份有限公司,河南 新野  473500)
 
摘要:为了选好用好钢丝圈、降低钢丝圈损耗并提高纺纱质量,介绍钢丝圈的技术要求、选配原则;对比分析了使用不同钢丝圈纺制集聚赛络纺CJ 14.5 tex纱和CJ 18.2 tex纱的毛羽和断头指标;从使用周期、减少磨损、规范选型、注重清洁等方面提出钢丝圈使用注意事项。指出:钢丝圈对成纱质量、生产效率的提升影响较大;应优选性价比高、使用周期较长、成纱毛羽和千锭时断头稳定的钢丝圈,并做好与钢领的配套管理工作。
关键词:钢丝圈;圈型;号数;选配;钢领;毛羽;断头
中图分类号:TS103.82+2          文献标志码:B          文章编号:1001-9634(2022)S1-0029-02
 
收稿日期:2021-10-09
作者简介:周海敏(1966—),女,河南新野人,工程师,主要从事棉纺工艺质量管理方面的工作。
 
Application Practice of Travellers
ZHOU Haimin,YANG Hongzhong
(Henan Xinye Textile Co.,Ltd.,Xinye 473500,China)
 
Abstract:In order to select and use travellers well,reduce the loss of travellers and improve the spinning quality,the technical requirements and matching principles of travellers are introduced.The hairiness and breakage indexes of compact-siro spinning CJ 14.5 tex yarn and CJ 18.2 tex yarn spun by different travelers are compared and analyzed,the points for attention in the use of travellers are proposed from the aspects such as service cycle,wear reduction,standard selection,and attention to cleaning.It is pointed out that traveller has great influence on yarn quality and production efficiency;the travellers with high cost performance,long service cycle,stable hairiness and breakage in per thousand spindles should be selected,and the matching and management of travellers and rings should be done well.
Key Words:traveller;traveller type;count;matching;ring;hairiness;breakage
 
参考文献:
[1] 吉宜军,范正春,阙玉生.钢领钢丝圈应用与管理探析[C] //“金猫·三友杯”2019’纺织器材专件智能驱动与融合创新专题论坛论文集.咸阳:全国纺织器材科技信息中心,2019:198-203.
[2] 缪定蜀.钢领钢丝圈纺制高品质纱线的思考[J] .纺织器材,2018,45(3):30-33.
[3] 胡振龙,赵卫华,吉孟国,等.钢领钢丝圈对成纱质量的影响[J] .纺织器材,2020,47(4):26-28.


相关热词搜索:钢丝圈 圈型 号数 选配

上一篇:V型牵伸配后区压力棒纺纱实践
下一篇:钢领与钢丝圈的应用及发展

分享到: 收藏