梳理方式对高强对位芳纶纺纱质量的影响
2023-02-09 10:44:47   来源:   评论:0 点击:

解决高强芳纶短纤纱线及织物开发的难题,以高强对位芳纶短纤为主要原料,对比清梳联梳理、清梳联梳理后成条仪梳理、直接成条仪梳理3种不同梳理方式及梳理工艺对纤维成纱性能的影响


何旭帆,江  慧,张玉泽,汪  军,陈 
(东华大学,上海  201620)
 
摘要:为解决高强芳纶短纤纱线及织物开发的难题,以高强对位芳纶短纤为主要原料,对比清梳联梳理、清梳联梳理后成条仪梳理、直接成条仪梳理3种不同梳理方式及梳理工艺对纤维成纱性能的影响,在此基础上试纺完成高强芳纶纤维/导电纤维 98/2混纺环锭纱线的纺纱工艺流程设计,得到能用于织造高性能防护服的纱线。结果表明:梳理工序是决定芳纶纱线质量的关键步骤;相较传统棉型清梳联装置,转杯成条仪梳理有助于减少棉结,提高纤维伸直平行度,使纤维得到更加充分地梳理,且操作简单,流程可控,对原料要求低、浪费小,更适合高性能纤维纱线的试纺和研发。
关键词:高强对位芳纶;梳理方式;导电纤维;清梳联;成条仪;转杯;分梳辊
中图分类号:TS104.2            文献标志码:A           文章编号:1001-9634(2022)06-0001-04
 
收稿日期:2022-04-21
作者简介:何旭帆(1997—),男,湖北荆门人,主要从事纺织及产品开发方面的研究。
 
Effect of Carding Method on Spinning Quality of High Strength Para-aramid Fiber
HE Xufan,JIANG Hui,ZHANG Yuze,WANG Jun,CHEN Xia
(Donghua University,Shanghai 201620,China)
 
Abstract:In order to solve the problems in the development of yarn and fabric of high strength aramid staple fiber,taking high strength para-aramid staple fiber as the main raw material,the effects of three different carding methods and carding processes of blowing-carding unit carding,roving instrument carding after blowing-carding unit carding,roving instrument carding on yarn forming properties of fibers are compared.On this basis,the spinning process design of high strength aramid fiber/conductive fiber 98/2 blended ring spining yarn is completed by trial spinning,and the yarn that can be used for weaving high performance protective clothing is obtained.The results show that the carding process is a critical step to determine the quality of aramid yarn.Compared with the traditional type of cotton carding unit,rotor roving instrument carding can help to reduce neps,and improve fiber straight parallel degree,to make the fiber card more fully;it is simple in operation,controllable in process,low requirement to the raw materials,small in waste,so it is more suitable for high performance fiber yarn spinning and R&D.
Key Words:high strength para-aramid;carding method;conductive fiber;blowing-carding unit;roving instrument;rotor;carding roller
 
参考文献:
[1] 刘呈坤,丁彩玲,刘佳.芳纶短纤纱的生产技术进展[J].纺织导报,2018(7):60-63.
[2] 刘荣清.改善纤维可纺性的技术措施与示例[J].棉纺织技术,2014,42(4):29-33.
[3] 郁崇文.纺纱学[M] .2版.北京:中国纺织出版社,2014.
[4] 刘俊芳,焦其朋.国产芳纶1414纤维纱线的开发要点[J].棉纺织技术,2012,40(12):42-44.
[5] 谢家祥.论纱线质量与控制[J].纺织器材,2017,44(6):35-39.
[6] 缪定蜀.破解新型纤维可纺性差的途径[J].纺织器材,2020,47(2):56-61.
[7] 王建伟,刘伟,雒书华.芳纶纤维纯纺纱的生产实践[J].上海纺织科技,2007,35(3):43-44.
[8] 唐建东,晏顺芝,孙轶荣,等.高服用性能阻燃纱线生产实践[J].纺织器材,2018,45(6):46-49.


相关热词搜索:高强对位芳纶 梳理方式

上一篇:基于线阵CCD的纱线常发性疵点检测研究
下一篇:TM-KSB型全自动磨胶辊机

分享到: 收藏