Autoconer 6型络筒机捻接工艺优化
2023-11-15 14:20:54   来源：   评论：0 点击：

  关键词：自动络筒机；捻接；退捻气压；加捻气压；退捻时间；加捻时间；喂入手臂；捻接强力； 捻接失败率；100 km捻粗节切纱
中图分类号：TS103.23⁺6              文献标志码：A             文章编号：1001-9634(2023)05-0023-04
 
收稿日期：2022-08-01；修回日期：2023-03-02
作者简介：贾森（1993—），男，河南南阳人，主要从事纺纱工艺设计等方面的工作。  
Abstract:In order to improve the production efficiency and reduce the energy consumption of the winder，the working principle and adjustment method of the air splicer of the Autoconer 6 winder are introduced.By selecting untwisting pressure，twisting pressure，untwisting time code，twisting time code and feeding arm code，the orthogonal test of 5 factors and 4 levels is designed.The splicing strength，the failure rate of splicing and the splicing thickness cutting yarn in 100 km are used to evaluate the splicing quality.The influence of the splicing parameters on the splicing quality of CJ 22.4 tex knitting yarn is verified by using fuzzy evaluation to score the test results.The results show that the optimized splicing process settings are that the untwisting pressure is 0.25 MPa，the twisting pressure is 0.4 MPa，the untwisting time is 200 ms，the twisting time is 240 ms and the feeding arm code is 64.The optimized splicing process can not only meet the quality requirements of CJ 22.4 tex knitting yarn，but also help to save energy，reduce consumption and improve the production efficiency of winder.
Key Words:automatic winder；splicing；untwisting pressure；twisting pressure；untwisting time；twisting time；feeding arm；splicing strength；failure rate of splicing；splicing thickness cutting yarn in 100 km
 
参考文献：
[1] 吴震宇，陈小天，石鹏飞，等.采用响应曲面法的纱线空气捻接参数优化[J].纺织学报，2016，37(1)：41-46.
[2] 张建明，刘梅，张泽龙.提高进口腈纶混纺纱捻接质量的工艺优化[J].棉纺织技术，2021，49(3)：55-58.
[3] 杨志清.自动络筒机筒纱毛羽形成原因及防治措施探讨[J].纺织器材，2011，38(1)：45-47.
[4] 时香.空气捻接器接头质量的控制措施[J].纺织器材，2018，45(5)：33-34.
[5] 立达（中国）纺织仪器有限公司.Autoconer 6V型自动络筒机说明书[Z].2015.
[6] 刘振学，王力.实验设计与数据处理[M].2版.北京：化学工业出版社，2015：66-74.
[7]  刘必英.正交试验、统计分析在纺纱质量控制中的应用[J].纺织器材，2016，43(5)：64-66.