精梳机顶梳齿密与梳理效果
2022-09-05 16:46:41   来源:   评论:0 点击:

为了提高精梳机顶梳的梳理效果、稳定成纱质量,通过试验对比不同顶梳齿密与不同质量纺纱原料、梳棉条、精梳条、棉纱细小纱疵间的关系;从是否使用顶梳清洁器和增加顶梳清洁次数


徐国强1,谭绍海2,熊   伟3
(1.中国针织工业协会,北京  100020;2.江门市新会区保华实业有限公司,
广东 江门  529157;3.新疆沃普农业发展有限公司,乌鲁木齐  830011)
 
摘要:为了提高精梳机顶梳的梳理效果、稳定成纱质量,通过试验对比不同顶梳齿密与不同质量纺纱原料、梳棉条、精梳条、棉纱细小纱疵间的关系;从是否使用顶梳清洁器和增加顶梳清洁次数,阐述精梳机顶梳清洁和维护保养对顶梳完好率的影响。指出:增加顶梳齿密对质量较差的纺纱原料及梳棉条改善效果显著;高齿密顶梳使精梳条棉结等指标显著下降,有利于减少棉纱中的细小纱疵;使用顶梳清洁器、增加顶梳清洁次数,顶梳完好率提高,精梳条质量有保障。
关键词:精梳机;顶梳齿密;纺纱原料;梳棉条;精梳条;细小纱疵;顶梳清洁器
中图分类号:TS103.11          文献标志码:B             文章编号:1001-9634(2022)03-0023-03
 
收稿日期:2022-03-18
作者简介:徐国强(1982—),河北沧州人,工程师,主要从事纺织服装产品的设计研发、标准制定、技术咨询等工作。
 
Tooth Density and Carding Effect of Top Comb of Comber
XU Guoqiang1,TAN Shaohai2,XIONG Wei3
(1.China Knitting Industry Association,Beijing 100020,China;2.Jiangmen Xinhui Baohua
Industrial Co.,Ltd.,Jiangmen 529157,China;3.Xinjiang Good Harvest Agriculture
Development Co.,Ltd.,Urumchi 830011,China)
 
Abstract:In order to improve the carding effect and stabilize the yarn quality of top comb of comber,the relationship between the tooth density of different top comb and the spinning material,carded sliver,combed sliver and the fine yarn defects of cotton yarn of different quality is compared through experiments.The influence of top comb cleaning and maintenance on top comb perfect rate is expounded from whether to use top comb cleaner and increasing top comb cleaning times.It is pointed out that increasing the tooth density of top comb can improve the quality of yarn and carded sliver remarkably.The top comb of high tooth density significantly reduces the nep and other indexes of combed sliver,which is beneficial to reduce the fine yarn defects.By using top comb cleaner and increasing top comb cleaning times,top comb perfect rate is improved and combed sliver quality is guaranteed.
Key Words:comber;tooth density of top comb;spinning material;carded sliver;combed sliver;fine yarn defects;top comb cleaner
 
参考文献:
[1] 熊伟,陈勇德.普瑞美与乌斯特纤维测试仪的对比分析[J] .纺织器材,2006,33(1):14-18.
[2] 熊伟.CJ 7.3 tex~CJ 4.2 tex纯棉高支纱的工艺研究[J] .新疆纺织,2000(3):39-41.


相关热词搜索:精梳机 顶梳齿密

上一篇:精梳集聚纺9.72 tex品种钢丝圈的选用
下一篇:再谈精梳机梳理隔距校正的技术要点

分享到: 收藏