再谈精梳机梳理隔距校正的技术要点
2022-09-05 16:57:31   来源：   评论：0 点击：

  关键词：精梳机；梳理；校正；隔距曲线；接针；嵌花；纱疵；纱线质量
中图分类号：TS103.82⁺1             文献标志码：B             文章编号：1001-9634(2022)03-0019-04
 
收稿日期：2021-08-04
作者简介：刘允光(1956—)，男，山东聊城人，高级技师，主要从事精梳梳理元件的合理使用与工艺设计。
   
Abstract:In order to improve the combing efficiency and yarn quality of cylinder for comber，a method to correct cylinder gauge of comber is introduced.The harm of improper cylinder combing gauge of comber and the influence of cylinder positioning technology and machine on cylinder combing gauge are analyzed.The technical points of correcting the combing gauge are discussed from five aspects.It is pointed out that the gauge can be adjusted by setting gaskets between cylinder rack and cylinder base，between cylinder base and cylinder flange and by using adjustable combing cylinder.The second method is the most common one.Improper gauge correction method is harmful to production；too small gauge can cause problems such as fiber loss aggravation，cylinder seriously inlaying，broken cotton web，poor clearness of cotton web，bell mouth pluging，power consumption rapid increasing and needle contacting easily and other problems；in the combing process，cylinder gauge should be appropriately reduced and ensure that the change is smooth and small.
Key Words:comber；carding；correction；gauge curve；needle contact；inlaying；yarn defects；yarn quality

参考文献：
[1] 刘允光，肖际洲，李子信.精梳梳理元件与成纱质量的关系[J].棉纺织技术，2016,44（9）：55-60.
[2] 刘允光，肖际洲，段昕.恒速梳理精梳机锡林定位工艺的技术探讨[J].棉纺织技术，2016,44（6）：63-67.
[3] 肖际洲，赵向峰，王爱琴，等.国产可调精梳整体锡林的合理使用[J].棉纺织技术，2017,45（6）：48-51.
[4] 刘允光.国内外精梳机梳理元件的应用[J].棉纺织技术，2016,44（12）：42-45.
[5] 刘允光.精梳机锡林接针原因分析及解决措施[J].棉纺织技术，2020,48（7）：43-47.
[6] 王允刚，李天龙，马希鹏，等.精梳设备的精细化管理[J].棉纺织技术，2020,48（4）：58-62.
[7] 刘允光.改善PX2、CJ40型精梳机梳理质量的技术措施[J].纺织导报，2016（5）:60-63.