多仓混棉机的结构改进与应用
2024-02-23 11:12:15   来源：   评论：0 点击：

  关键词：多仓混棉机；压力检测；角钉帘；漏底除杂；故障率
中图分类号：TS103.11⁺2            文献标志码：B              文章编号：1001-9634(2024)01-0027-03
 
收稿日期：2023-02-17；修回日期：2023-05-20
作者简介：王  勇（1989—），男，山东潍坊人，工程师，主要从事多仓混棉机、称量混纺设备等纺织机械的研究与开发。
  Abstract:In order to solve the problems，such as poor pressure stability，high maintenance cost of spike lattice and easy clogging of under-screen mesh plate and waste pipe of the existing multi-bin mixer，the structure composition and mixing principle of multi-bin mixer are analyzed，and the existing problems of multi-bin mixer are analyzed from the aspects of pressure detection of cotton storage bin，maintenance of spike lattice and waste removal of under-screen，and the structure of the multi-bin mixer is improved.It is pointed out that after the improvement，the pressure fluctuation value of the multi-bin mixer is reduced，the number of ineffective cotton needs is reduced，the replacement of nail strip is time-saving and labor-saving，the maintenance of spike lattice is improved，the blockage and accumulation of impurities in the waste removal device of under-screen are improved.The failure rate is reduced，the mixing effect is improved，the labor is reduced，and the production capacity is increased.
Key Words:multi-bin mixer；pressure detection；spike lattice；waste removal of under-screen；failure rate
 
参考文献：
[1] 邱香菊.多仓混棉机的结构改进[J].山东纺织科技，2011，52(6)：26-28.
[2] 张献彬，高震，李德英，等.JWF1022型多仓混棉机结构和性能分析试验[J].纺织机械，2010(4)：42-45.
[3] 严旭新，黄玉强，于文菡，等.新型色纺精细混棉工艺流程研究[J].棉纺织技术，2015，43(6)：49-52.
[4] 刘裕瑄，陈人哲.纺织机械设计原理[M].北京：纺织工业出版社，1981.