柔性梳理用针布设计原理探析
2018-11-20 18:53:24   来源:   评论:0 点击:

为提高梳理效果,减少纤维损伤,介绍被梳理纤维的性质与特点以及握持梳理、自由梳理等相关梳理公式和原理,根据柔性梳理的要求,分析其特点、影响因素及刺辊、锡林、道夫和回转盖板等
陈玉峰1,王子峰2
(1.光山白鲨针布有限公司,河南 光山  465450;2.项城市纺织有限公司,河南 项城  466200)
 
摘要:为提高梳理效果,减少纤维损伤,介绍被梳理纤维的性质与特点以及握持梳理、自由梳理等相关梳理公式和原理,根据柔性梳理的要求,分析其特点、影响因素及刺辊、锡林、道夫和回转盖板等梳理器材的设计要求。指出:梳理过程中纤维、针布间的相互作用,实现了纤维与杂质分离和纤维的伸直平行,但易造成纤维损伤和梳理过度的矛盾;提出需柔性梳理,即对金属针布齿条、回转盖板弹性针布进行系统设计和配套使用,以提高纤维转移率和梳理效果,减少针布负荷和纤维损伤,实现梳理充分、降低棉结。
关键词:柔性梳理;握持梳理;自由梳理;纤维运动;针布负荷;刺辊;锡林;道夫;盖板
中图分类号:TS103.82+1      文献标志码:A      文章编号:1001-9634(2018)04-0005-05
 
收稿日期:2017-12-14
作者简介:陈玉峰(1975—),男,河南项城人,工程师,主要从事棉纺工程、新型纺纱质量控制研究。
 
Analysis of the Design Principle of Clothing for Flexible Carding
CHEN Yufeng1,WANG Zifeng2
(1.Guangshan White Shark Clothing Co.,Ltd.,Guangshan 465450,China;2.Xiangcheng Textile Co.,Ltd.,Xiangcheng 466200,China)
 
Abstract:To improve the carding effect with less damage of fiber,introduction is given to the properties and characteristics of the fiber to be combed and the related carding formula and principle of gripping and free carding.According to the requirements of the flexible carding,analysis is done to the characteristics,influencing factors and the design requirements of the carding equipment such as taker-in roller,cylinder,doffer and rotating flat.It is pointed out that the interaction between the fiber and the clothing in the carding process can realize the separation of fiber from impurity and fiber straightening,possibly arising problems of the fiber damage and the excessive combing.An appeal is made to the flexible carding,that is,design and configuration are required of the system of the MCC wire and the elastic clothing with rotating flat for better fiber transfer rate and carding effect and less load of clothing and fiber damage,so as to achieving full carding and less neps.
Key Words:flexible carding;grip carding;free carding;fiber movement;clothing load;taker-in roller;cylinder;doffer;flat
 
 
参考文献:
[1] (苏)И.Г.鲍尔茹诺夫.棉与化纤纺纱工程(上册)[M].梅自强,译.北京:纺织工业出版社,1989:90-96.
[2] 张文赓,郁崇文.梳理的基本理论[M].上海:东华大学出版社,2012:36-42.
[3] 孙鹏子.梳棉机工艺技术研究[M].北京:中国纺织出版社,2012:66-73.
[4] 费青,阙浩英,陈海涛,等.梳理针布的工艺特性、制造和使用[M].北京:中国纺织出版社,2007:16-49.
[5] 孙鹏子.高产梳棉机工艺技术理论的研究[M].上海:东华大学出版社,2002:20-26.
[6] 费青.高产梳棉机提高除杂作用的研究与分析[J].棉纺织技术,2007,35(8):1-5.
[7] 费青.梳理针布的工艺特性制造和使用[M].北京:中国纺织出版社,2007:160-480.
[8] 孙鹏子,王兰,张志丹,等.刺辊与分梳板隔距对生条质量的影响[J].棉纺织技术,2007,35(8):6-8.
 
 

相关热词搜索:

上一篇:锭子磨损分析及改进方法
下一篇:正交叠层机织碳布输送装置研制

分享到: 收藏