RSB-D45C型并条机故障处理与维护
2018-11-20 18:45:39   来源:   评论:0 点击:

为了排除RSB-D45C型并条机使用故障,提高生产效率和并条质量,分析换筒后断头缠绕胶辊、粗节多及存在机械波等问题的原因并提出解决方案,同时对该机使用注意事项、加油和维修保养重点检
罗玉民,齐英杰
(河北力科纺织有限责任公司,河北 沧州  061600)
 
摘要:为了排除RSB-D45C型并条机使用故障,提高生产效率和并条质量,分析换筒后断头缠绕胶辊、粗节多及存在机械波等问题的原因并提出解决方案,同时对该机使用注意事项、加油和维修保养重点检查部位及周期进行说明。指出:换筒后断头缠绕胶辊与棉条切断长度及前张力大小的设定有关;粗节多应清除凹凸罗拉处的飞花短绒;调整落棉质量、输出张力和凹凸罗拉等可以改善机械波;生产中设备操作需规范熟练,实时调整设置和工艺,加强对并条机的维护和管理。
关键词:RSB-D45C型并条机;故障;缠绕;胶辊;粗节;机械波;维护
中图分类号:TS103.22+4      文献标志码:B      文章编号:1001-9634(2018)04-0041-03
 
收稿日期:2017-12-25
作者简介:罗玉民(1968—),男,河北东光人,技师,主要从事纺织设备管理工作。
 
Fault Handling and Maintenance of the Drawing Frame RSB-D45C
LUO Yumin,QI Yingjie
(Hebei Like Textile Co.,Ltd.,Cangzhou 061600,China)
 
Abstract:In order to debug the using faults of the drawing frame RSB-D45C,and to improve production efficiency and drawing quality,analysis is done to the reasons why the problems commonly occur such as end lapped rollers,too many thicks,and the mechanical waves after tube changing,and solutions to the problems are recommended,and simultaneously cautions needing to pay attention and the key parts needing oiling and maintaining are introduced.It is pointed out end lapped rollers after tube changing is related to the section length  of sliverand front tension.To reduce thicks,the fly and short fiber in concave rollers must be cleared the mechanical waves can be improved by adjusting noil rate,output tension,and concave rollers.In real production,the operations of the equipments should be normalized in proficiency level,and the process should be adjusted in real time,and the maintaince and management of the drawing frame RSB-D45C should be reinforced in production.
Key Words:drawing frame RSB-D45C;fault;lapping;roller;thicks;mechanical wave;maintenance
 
参考文献:
[1] 缪定蜀,刘国卫.并条机技术的发展:上[J].纺织导报,2013(1):64-68.
[2] 宋育红,王贯超.国内外并条机发展现状[J].国际纺织导报,2011,39(3):31-32,34.
[3] 贺梅.RSB-D45C型自调匀整并条机的使用实践[J].纺织器材,2016,43(6):42-46.
 
 

相关热词搜索:

上一篇:浅析自动络筒机甩纱原因
下一篇:新型中心距可调消隙齿轮副

分享到: 收藏