特细金属丝整经筒子架及单丝张力控制的研究
2017-12-06 17:29:50   来源:   评论:0 点击:

为解决特细金属丝整经过程中易断丝,张力控制难度大等问题,介绍特细金属丝整经难点,对比矩形筒子架和V型筒子架的优缺点,设计V型对称错位结构筒子架;阐明单丝张力控制的意义,并从
邓先明1,王凌鹏2,杨  1,杜  1
(1.天津工业大学 机械工程学院,天津  300387;2.杭州匡时科技有限公司,杭州  311217)
 
摘要:为解决特细金属丝整经过程中易断丝,张力控制难度大等问题,介绍特细金属丝整经难点,对比矩形筒子架和V型筒子架的优缺点,设计V型对称错位结构筒子架;阐明单丝张力控制的意义,并从单丝张力控制方法及闭环控制等方面进行分析,设计一种重锤摩擦盘式单丝张力控制机构,并对无单丝张力控制、重锤张力杆式调节和重锤摩擦盘式调节三种控制方式进行对比试验。指出:V型对称错位结构筒子架,能有效减小金属丝在筒子架上的摩擦力及金属丝交叉问题;重锤摩擦盘式控制方式较无单丝张力控制和重锤张力杆式,达到稳态的时间快,单丝张力稳定性好,可将单丝张力误差控制为±3 cN,适用于直径为0.012 mm~0.050 mm的金属丝整经。
关键词:特细金属丝;整经;筒子架;V型错位;单丝张力;重锤摩擦盘;张力控制
中图分类号:TS103.3      文献标志码:B      文章编号:1001-9634(2017)06-0011-04
 
收稿日期:2017-03-11
作者简介:邓先明(1992—),男,湖北十堰人,硕士研究生,主要从事金属丝整经工艺及装备方面的研究。
 
A Study on the Creel and the Tension Controlof Monofilament of Super Fine Wire
DENG Xianming1,WANG Lingpeng2,YANG Tao1,DU Yu1
(1.School of Mechanical Engineering Tianjin Polytechnic University,Tianjin 300387,China;2.Hangzhou Kunst Filter Co.,Ltd.,Hangzhou 311217,China)
 
Abstract:To solve the problems with super fine wire breakage and difficulty in tension control in the process of warping,introduction is made to the warping bottleneck,comparison is done to the rectangular creel and V-type creel on their advantages and disadvantages,and a symmetric V-type dislocation structured creel is introduced. Significance is highlighted on monofilament tension control.A hammer disc friction monofilament tension control mechanism is introduced from the aspects of wire tension control and closed loop control.The three control modes were compared including free filament tension control,tension rod weight regulation and weight adjusting friction disc.It is pointed out that the creel of the V-type symmetric dislocation structure can effectively reduce friction of the metal wire on the cylinder frame and wire lapping;weight adjusting friction disc can access to steady state in short time as compared with the other two structures and gain good stability of monofilament tension,consequenly making the tension control error within ±3 cN,applicable to wire warping of diameter between 0.012 mm~0.050 mm.
Key Words:super fine wire;warping;creel;V-type dislocation;monofilament tension;weight adjusting friction disc;tension control
 
参考文献:
[1] 刘鹤青.机织金属丝网的用途简介[J].产业用纺织品,2008(8):33-35.
[2] 刘林阴,杨涛,高殿斌,等.聚酯单丝整经机结构与控制设计[J].机械设计与制造,2011(5):38-40.
[3] 李娟,汪荣顺,石玉美,等.在低温液体纯化中采用金属丝网过滤技术的可行性研究[J].低温工程,2006(3):39-42.
[4] HB 5177—1996,金属丝材拉伸试验方法[S].
[5] 宋如轩,宋国健.金属丝编织网工艺学[M].北京:中国标准出版社,2007.
[6] 邓先明,杨涛.金属丝整经装备及发展现状[J].纺织导报,2016(3):46-50.
[7] 王鸿博,高卫东.现代整经技术及其发展趋势[J].纺织导报,2004(3):4-6.
[8] 杨志清.国外高速整经筒子架的新变化[J].棉纺织技术, 2006,34(5):63-64.
[9] 郭圈勇.整经张力控制要点[J].棉纺织技术,2012,40(11):50-52.
[10] 何军锋.基于可编程控制器的分切机控制系统的研究[D].西安:西安理工大学,2008.
 

相关热词搜索:金属丝 筒子架 整经

上一篇:创新的五月柱型编织机参数化结构设计
下一篇:基于PLC的织物型零热通量体核温度测量仪的研发

分享到: 收藏