短沟距双沟道轴承心轴加工方法
2017-06-07 17:06:55   来源：   评论：0 点击：

摘要：为了提高短沟距双沟道轴承心轴的加工精度及生产效率，介绍该心轴的初始加工方案，分析其沟道加工难点以及传统单沟道翻转磨削方法加工精度差、报废率高、磨削效率低、产品装配困难等缺陷，提出短沟距双沟道轴承心轴改进加工方案及其工艺流程、尺寸控制标准。指出：改进方案通过两根心轴组合交错磨4沟道工艺，有效提高了零件的加工精度和磨削效率，满足大批量生产要求。
关键词：短沟距；单沟道翻转磨削；双沟道轴承；心轴；交错磨；加工精度
中图分类号：TS103.8  文献标志码：B  文章编号：1001-9634(2017)03-0021-02
  Abstract: In order to improve the machining precision and production efficiency of the mandrel of double raceways bearing with short channel spacing.Introduction is made to the initial processing scheme of mandrel,analysis is done to the difficulties of channel processing and the defects of the traditional processing method of single channel roll-over grinding,such as poor machining precision,high scrap rate,low grinding efficiency,product assembly difficulties and such.The improvement of processing scheme,process flow,size control standard is done to the mandrel of double raceways bearing with short channel spacing.It is pointed out that the improvement scheme through two mandrel combination staggered grinding four channel,it can effectively improve the machining precision and grinding efficiency,and meet the requirements of mass production.
Key Words: short channel spacing;single channel roll-over grinding;double raceways bearing;mandrel;staggered grinding;machining precision
 
收稿日期： 2016-10-06
作者简介：邹友民（1979—），男，湖南衡阳人，高级工程师，主要负责公司现场生产服务方面的工作。
 
参考文献：
［1］ 成大先.机械设计手册［M］.北京：化学工业出版社，2002.
［2］ 姚穆.纺织材料学［M］.2版.北京：中国纺织出版社，2004.
［3］ 孟少农.机械加工工艺手册［M］.北京：机械工业出版社，1992.
［4］ 中国机械工程学会，第一机械工业部.机修手册［M］.北京：机械工业出版社，1977.