浅谈集聚纺上罗拉轴承中过桥齿轮材料的选择
2013-04-01 08:55:51   来源:   评论:0 点击:

为保证过桥齿轮在受温度、承载及防蚀、防污等环境影响下能正常使用,介绍了AS型集聚纺上罗拉的结构、工作环境及传动过程,分析了其过桥齿轮结合件的结构及使用要求,通过将聚甲醛塑料
   张华荣,郑林海,张润丽 
 (山西经纬纺机专件有限公司,山西晋中  030601)  
  
摘要:为保证过桥齿轮在受温度、承载及防蚀、防污等环境影响下能正常使用,介绍了AS型集聚纺上罗拉的结构、工作环境及传动过程,分析了其过桥齿轮结合件的结构及使用要求,通过将聚甲醛塑料、含油滑动轴承等专业技术在过桥齿轮上的应用,说明过桥齿轮结合件设计结构简单、合理,其材料具有优越的耐蚀性,可在一些无法加油及不能加油的情况下使用。
关键词:集聚纺;上罗拉;轴承;过桥齿轮;胶辊;聚甲醛塑料;卷制式含油滑动轴承;自润滑;耐蚀性
中图分类号:TS103.81+2  文献标识码B      文章编号:1001-9634(2011)02-0019-02
 
收稿日期:2010-11-03
作者简介:张华荣(1975—),男,山西左权人,工程师,主要从事细纱机专件上(中上)罗拉轴承和牵伸罗拉开发、加工制造。  
 
参考文献:
[1] 徐灏,邱宣怀,蔡春源.机械设计手册:第4卷[M].北京:机械工业出版社,1991:27-177.
[2] 戴枝荣,张明远.工程材料及机械制造基础(Ⅰ):工程材料[M].北京:高等教育出版社,1992:150-164.
[3] 孙桓,傅则绍.机械原理[M].北京:高等教育出版社,1989:245-294.
[4] 濮良贵,纪名刚.机械设计[M].北京:高等教育出版社,1996:194-236.
Material Selection of the Intermediate Gear in the Top Roller Bearing for Compact Spinning
ZHANG Hua-rong,ZHENG Lin-hai,ZHANG Run-li
(Shanxi Jingwei Tex-machinery Parts Corporation,Jinzhong 030601,China)
Abstract:In order to keep the intermediate gear running smoothly under the environment of temperature variation,loading,and anti-rust and anti-contamination,introduction is made to the structure,work condition,and conveying process of the top roller AS for compact spinning,analysis is done to the structure of the joinning parts of the intermediate gear and its application caution.Through application of the POM material,oil-contained sliding bearing on the intermediate gear,it proves that the joining parts of the intermediate gear is of simple structure and reasoned design,marked anti-rust property,thus applicable for the environment in which oiling is not accessible or impossible.
Key Words:compact spinning;top roller;bearing;intermediate gear;cot;POM;rolling oil contained sliding bearing;self lubrication,anti-rust property

相关热词搜索:集聚纺 上罗拉 轴承 过桥齿轮

上一篇:A186F型梳棉机加装GFB-ⅢQ型固定齿条盖板的实践
下一篇:纺纱胶辊用橡胶之选用

分享到: 收藏