优选梳棉针布 优化工艺 减少棉结 (上)
2013-04-01 08:51:25   来源:   评论:0 点击:

为了减少并条后的棉结以提高棉条质量,从牵伸工艺不符合纤维弯钩伸直理论、生条中纤维分离度和平行伸直度差、生条中短绒高等方面,分析了并条后棉结增加的主要原因。通过大量试验分析
许鉴良 
 (东华大学,上海  201620)  
  
摘要:为了减少并条后的棉结以提高棉条质量,从牵伸工艺不符合纤维弯钩伸直理论、生条中纤维分离度和平行伸直度差、生条中短绒高等方面,分析了并条后棉结增加的主要原因。通过大量试验分析,提出有效降低并条后棉结增加的措施:普梳头并、精梳预并、普梳粗纱牵伸工艺应符合前弯钩纤维伸直理论;普梳二并、精梳卷或条并卷、普梳细纱牵伸工艺应符合后弯钩纤维伸直理论;提高生条的纤维分离度和平行伸直度;减少生条短绒率;严格控制各工序温、湿度等;另外,应加强并、粗、细牵伸区内飞花、短绒的清除;选用优质针布,并合理配置梳棉机的速度和隔距,从轻控制定量、适当调慢速度,发挥附加分梳件和棉网清洁器的作用,从源头上防止梳棉后续工序棉结的增加。
关键词:梳棉机;针布;短绒;棉结;并条;分梳件;棉网清洁器;伸直度系数;牵伸工艺
中图分类号:TS103.82+1     文献标识码:A   文章编号:1001-9634(2011)02-0026-05
 
收稿日期:2010-11-15
作者简介:许鉴良(1936—),男,江苏无锡人,副教授,主要从事梳理器材方面的研究。  
 
参考文献:
[1] 上海纺织工学院棉纺教研究室.棉纺学:下[M].北京:北京外文印刷厂出版,40-47.
[2] 邵珠莲,刘承晋.提高细纱条干均匀度的工艺优化配置[J].棉纺织技术,2007,35(1):9-12.
[3] 许鉴良.棉结杂质的控制[J].梳理技术,5:67-73.
[4] 周锁林.梳棉机生条结杂的研究与控制[J].棉纺织技术,2007,35(2):10-12.
[5] 张毅,王东明,黄金贵.加装固定盖板对生条及成纱质量的影响分析[J].棉纺织技术,2007,35(2):6-9.
[6] 许鉴良.棉结杂质的控制[J].梳理技术,4:73-79.
[7] 许鉴良.短流程清梳联短绒和棉结杂质的控制:上[J].梳理技术,12:63-69.
[8] 许鉴良.短流程清梳联短绒和棉结杂质的控制:下[J].梳理技术,13:57-68.
[9] 孙鹏子,王兰,王蓬林.新型梳针刺辊研究[J].棉纺织技术,2007,35(6):16-19.
  
 
Carefull Selection of the Cotton Card Clothing with Optimization of the Spinning Process for Less Neps
XU Jian-liang
(Donghua University,Shanghai 201620,China)
Abstract:In order to reduce the neps after the drawing process for better yarn quality,considering the fact that there is inconformity of the draft process with the theory of hooked fiber unwinding,poor breakaway of fiber from the card sliver and poor parallel unwinding,rich short fiber in the card sliver,the main causes are analyzed for the increase of the neps after drawing process.Lot of tests prove  that it is necessary to reduce neps after the drawing process effectively with some measures.The first drawing process of the carded yarn, the pre-drawing of the combed yarn and the draft process of the carded roving should be in conformity with the theory of the hooked fiber unwinding.It is also necessary to increase the breakaway of the fiber from the card sliver and the parallel unwinding,to reduce the short fiber of the card sliver,to strictly control the specifications such as humiture in diffenrent processes.Moreover,reinforcement clearing the fly and the short fiber is necessary in the carded and combed yarn area.Selection of the quality clothing is required together with proper configuration with card speed and the gauge for proper ration and proper speed.The additional card elements and the cotton web clearer are to be brought into play,consequently preventing the increase of neps in the after card process.
Key Words:card;card clothing;short fiber;neps;drawing;card element;cotton web clearer;unwinding factor;draft process

相关热词搜索:梳棉机 针布 短绒 棉结

上一篇:A201型精梳机应用新型器材降低棉结的实践
下一篇:A186F型梳棉机加装GFB-ⅢQ型固定齿条盖板的实践

分享到: 收藏