USG自调匀整并条机的使用实践
2016-07-26 23:00:21   来源:   评论:0 点击:

为了充分发挥并条机USG自调匀整系统能效,分析了其构成、功能和技术参数,重点阐述死区长度和线性因数的设置;探讨了正确使用、设置USG自调匀整参数的方法及注意事项。指出:USG自调匀整
王学元,沈  慧
(中国纱线网,杭州  311203)
 
摘要:为了充分发挥并条机USG自调匀整系统能效,分析了其构成、功能和技术参数,重点阐述死区长度和线性因数的设置;探讨了正确使用、设置USG自调匀整参数的方法及注意事项。指出:USG自调匀整系统对控制并条质(重)量不匀率等指标具有重要作用,正确设置相关参数是用好自调匀整并条机的前提;正确理解参数含义,根据生产情况进行修正和调整,加强对自调匀整系统的维护和管理,才能发挥自调匀整并条机应有的作用。
关键词:并条机;USG自调匀整;凹凸罗拉;FP传感器;开环控制;死区长度;线性因数
中图分类号:TS103.11+3      文献标志码:B      文章编号:1001-9634(2016)04-0042-03
 
收稿日期:2016-01-18
作者简介:王学元(1969—),男,山东巨野人,工程师,主要从事棉纺技术与产品质量管理工作。
 
Practice of Drawing Frame with USG Autoleveler
WANG Xueyuan,SHEN Hui
(China Yarn com,Hangzhou 311203,China)
 
Abstract:In order to give full play to the drawing frame with USG autoleveler system for good energy efficiency,analysis is done to the  the structure,performance,and the technical parameters.Highlight is given to the dead zone length and linear factor settings.Probing is done into the proper use,setting the USG autoleveler parameters and the cautions.It is pointed out that  the USG autoleveler system is important in controlling the irregularity index.Correct setting relevant parameters is key to making good use of the drawing frame with autoleveler system.Correct understanding of the meaning of the parameters,revision and adjustment of the same,strengthening maintenance and management of the system,can make full play of the performance of the drawing frame with autoleveler system.
Key Words: drawing frame;USG autoleveler;concave roller;FP sensor;open loop control; dead zone length;linear factor
 
参考文献:
[1] 乌斯特技术股份有限公司.USG自调匀整使用说明[Z].
[2] 张勇.FA322并条机使用USG自调匀整系统操作实践[J].现代纺织技术,2007(1):26-28.
[3] 谢继延.并条机常见典型自调匀整装置的原理与性能比较[J].轻纺工业与技术,2011,40(3):7-9.
[4] 吴敏,徐旻,王红芳.并条机自调匀整技术的作用与特点[J].轻纺工业与技术,2003,32(7):29-31.
[5] 黄锐,潘利艳,张贵宝,等.高速并条机自调匀整控制系统研究[J].青岛大学学报:工程技术版,2007,22(3):28-31.

相关热词搜索:并条机 自调匀整

上一篇:竹节纱生产工艺探讨
下一篇:四罗拉粗纱机弹簧加压摇架压力调整和管理

分享到: 收藏