三维刚性剑杆织机引纬和打纬机构的设计研究
2015-12-04 15:10:40   来源:   评论:0 点击:

为了合理选择三维刚性剑杆织机引纬和打纬机构的组合形式,织造不同幅宽三维间隔织物,通过对幅宽为100 cm织物的三种引纬机构分别在ADAMS平台和Ansoft Maxwell 2D平台上进行建模、仿真设计,由
韩斌斌1,王益轩2,路  超2,梁瑜洋2,赵  梅2
(1.北京星航机电装备有限公司 研发中心,北京  100600;
2.西安工程大学 机电工程学院,西安  710048)
 
摘要:为了合理选择三维刚性剑杆织机引纬和打纬机构的组合形式,织造不同幅宽三维间隔织物,通过对幅宽为100 cm织物的三种引纬机构分别在ADAMS平台和Ansoft Maxwell 2D平台上进行建模、仿真设计,由仿真分析可知空间连杆引纬、导杆引纬和电磁引纬不仅能满足引纬的工艺要求,而且各具特点,又针对不同幅宽的间隔机织物,提出了三种不同的引纬和打纬机构,并对三种不同形式的六连杆打纬机构在ADAMS平台上进行了仿真分析与设计。指出:实际设计可根据三维机织物的组织结构和幅宽合理地选用引纬和打纬机构的组合,满足三维间隔机织物要求,拓宽其应用领域。
关键词:三维织机;间隔机织物;刚性剑杆;引纬机构;打纬机构;六连杆;四连杆;仿真
中图分类号:TS103.133    文献标志码:A    文章编号:1001-9634(2015)06-0010-07
 
收稿日期:2015-02-12
基金项目:陕西省教育厅产业化培育项目资助(项目编号:2013JC17)
作者简介:韩斌斌(1985—),男,硕士研究生,河北泊头人,主要研究方向为CAD/CAE/CAM、虚拟样机技术。
 
Design and Research of the Weft Insertion and Beating Mechanism
 of the 3D Rigid Blade Loom
HAN Binbin1,WANG Yixuan2,LU Chao2,LIANG Yuyang2,ZHAO Mei2
(1. The R&D Center Beijing Xinghang Mechtronical Equipment Co.,Ltd.Beijing 100600,China;2.The Mechtronical Engineering College Xi’an Polytechnic University,Xi’an 710048,China)
 
Abstract:In order to have a reasonable selection of a mechanism of weft insertion and beating up combination of a 3D rigid rapier loom,a model is established and simulation is designed for a fabric with width of 100 cm fabric on three different weft insertion mechanisms in the platforms of ADAMS and Ansoft Maxwell 2D.The simulation analysis proves that weft insertions of connecting rod,or of a guiding rod, or of electromagnetic,the three of which cater the requirement of weft insertion process with their own characteristics. As to different width of interval woven fabrics on the three kinds of different weft insertion and beating up mechanisms,simulation designing and analysis are done on the platform ADAMS with three different forms of six bar linkage beating up mechanism.It is pointed out that the actual design needs conformity with the 3D woven fabric structure and width of reasonable selection of weft insertion and beating up mechanism of combination so to meet the requirements of 3D spacer fabric,a promotion of its application.
Key Words:3D looms;intervoven fabric;rigid rapier;weft insertion mechanism; beatin-up mechanism;six bar linkage;four bar linkage;simulation
 
参考文献:
 [1]  曹海建.三维机织整体中空复合材料的结构及性能研究[D].无锡:江南大学,2010.
 [2]  谈蔚.三维机织物的性能特征与常规设计[J].国外丝绸,2013(6):3-6.
 [3]  刘裕瑄,陈人哲.纺织机械设计原理[M].北京:纺织工业出版社,1982.
 [4]  华大年,唐之伟.机构分析与设计[M].北京:纺织工业出版社,1985.
 [5]  姜怀,华大年,缪元吉,等.SFJ型剑杆织机上PL-SSRR型引纬机构的分析综合和最优化设计[J].上海纺织科技,1984(2):5-13.
 [6]  叶云岳.直线电机原理与应用[M].北京:机械工业出版社,2006.
 [7]  聂永峰.永磁直线同步电机设计研究[D].上海:上海交通大学,2009.
 [8]  王长通.织机连杆打纬机构的分析[J].中原工学院学报,2004,15(6):44-46.
 [9]  袁守华,赵天奇.六连杆打纬机构计算机辅助设计[J].郑州纺织工学院学报,1992,3(2):57-64.
 [10]  马世平.基于MATLAB的六连杆打纬机构优化设计及仿真[J].纺织学报,2006,27(3):40-42.
 

相关热词搜索:三维 剑杆 织机

上一篇:基于Profibus-DP的6RA70直流调速热定型拉伸控制系统
下一篇:金属针布齿条齿型规格设计探讨(一)

分享到: 收藏