新型纱线捻接器配置及应用
2015-12-04 14:57:41   来源:   评论:0 点击:

为了提升纱线质量,介绍了空气捻接器的工作原理及手动、自动空气捻接器的捻接过程,对比分析了不同类型捻接器对不同种类新型纱线的捻接效果,并对FC309型退捻管式空气捻接器的捻接腔进
时  香
(灌南宏益纺织有限公司,江苏 灌南  222500)
 
摘要:为了提升纱线质量,介绍了空气捻接器的工作原理及手动、自动空气捻接器的捻接过程,对比分析了不同类型捻接器对不同种类新型纱线的捻接效果,并对FC309型退捻管式空气捻接器的捻接腔进行了改进。指出,空气捻接器的选配对纱线尤其新型纱线的影响至关重要,通过合理使用,能够有效提升纱线的捻接效果及成纱质量。
关键词:新型纱线;捻接器;捻接腔;配置;应用
中图分类号:TS103.23+4    文献标志码:B    文章编号:1001-9634(2015)06-0052-03
 
收稿日期:2015-05-06
作者简介:时  香(1970—),女,江苏灌南人,工程师,主要从事纺纱工艺设计、设备管理和质量控制等工作。
 
The Configuration and Application of the New Yarn Splicer
SHI Xiang
(Guannan Hongyi Textile Co.,Ltd.,Guannan 222500,China)
 
Abstract:In order to improve yarn quality,introduction is made to the splicing workhow of the air splicer in contrast to the manual products as to the splicing process. Comparative analysis is done to the splicing effects resulted from the splicer of different kinds on different kinds of the new yarn.Some modification is made to the splicing cavity of the de-twisting tubular air splicer FC390.It is pointed out that the selection of air splicer is important to yarn especially the new yarn.Good use of the splicer can effectively enhance the splicing effect of the yarn and yarn quality.
Key Words:the new yarn;splicer;splicing cavity;configuration;application
 
参考文献:
[1] 李国峰,李惠军.提高Espero-M型络筒机捻接质量的体会[J].棉纺织技术,2012,40(11):47-49.
[2] 周广振.空气捻接器关键部件的理论研究与优化设计[D].青岛:青岛科技大学,2013.
[3] 杨海峰.提高纱线捻接质量的措施与体会[C]//2012’全国自动络筒技术研讨会论文集.北京:中国棉纺织行业协会,2012:187-188.
[4] 高加平,赵世峰.自动络筒捻接器的工艺设置与维护保养[C]//2012’全国自动络筒技术研讨会论文集.北京:中国棉纺织行业协会,2012:260-261.
[5] 魏倍倍.提高差别化纤维捻接质量的体会[C]//2012’全国自动络筒技术研讨会论文集.北京:中国棉纺织行业协会,2012:172-173.

相关热词搜索:捻接器 配置 应用

上一篇:更换破损尘笼网眼板的巧妙方法
下一篇:从卡摩纺导流板的变迁看集聚原理

分享到: 收藏