基于JOINTAIR 798Q型空气捻接器的粘胶纱捻接工艺优化
2022-10-26 09:06:54   来源:   评论:0 点击:

为了提高VCRO型自动络筒机络细号粘胶纱的捻接质量和效率,基于JOINTAIR 798Q型空气捻接器,以VCRO-E型自动络筒机络集聚赛络纺9 7 tex粘胶纱为研究对象,利用正交实验法和单因子试验法对退捻时间


朱起宏,孙振华,田瑞芳
(青岛宏大纺织机械有限责任公司,山东 青岛  266101)
 
摘要:为了提高VCRO型自动络筒机络细号粘胶纱的捻接质量和效率,基于JOINTAIR 798Q型空气捻接器,以VCRO-E型自动络筒机络集聚赛络纺9.7 tex粘胶纱为研究对象,利用正交实验法和单因子试验法对退捻时间、搭接长度、加捻时间和捻接气压4个因素进行分析,得出其最佳捻接参数并试验对比优化结果。结果表明:集聚赛络纺9.7 tex粘胶纱的最佳捻接工艺参数退捻时间为4档、搭接长度为9档、加捻时间为1档、捻接气压为0.55 MPa;应用最佳工艺参数后,纱线的捻接强力达137 cN,强力CV值为11.20%,较优化前明显改善,且捻接处外观均匀光滑。
关键词:空气捻接器;粘胶纱;捻接强力;正交实验;退捻时间;搭接长度;加捻时间;捻接气压
中图分类号:TS103.12+5          文献标志码:A          文章编号:1001-9634(2022)04-0004-04
 
收稿日期:2021-10-25
作者简介:朱起宏(1969—),女,山东青岛人,高级工程师,主要从事纺织机械制造及工艺方面的研究。
 
Optimization of Viscose Yarn Twisting Process Based on Air Splicer JOINTAIR 798Q
ZHU Qihong,SUN Zhenhua,TIAN Ruifang
(Qingdao Hongda Textile Machinery Co.,Ltd.,Qingdao 266101,China)
 
Abstract:In order to improve the splicing quality and efficiency of the automatic winding machine VCRO winding fine viscose yarn,based on the air splicer JOINTAIR 798Q,taking compact siro spinning 9.7 tex viscose yarn winded by the automatic winding machine VCRO-E as the research object,the orthogonal experiment and single factor experiment are used to analyze the four factors of untwisting time,lap length,twisting time and splicing pressure,and the optimal twisting parameters are obtained and the optimized results are compared.The results show that the optimal twisting parameters of compact siro spinning 9.7 tex viscose yarn are as follows: the untwisting time is the fourth grade,the lap length is the ninth grade,the twisting time is the first grade and the twisting pressure is 0.55 MPa.After the optimum process parameters are applied,the twisting strength of yarns reaches 137 cN,the strength CV value is 11.20%,which are significantly improved compared with that before optimization,and the appearance of the twisting is uniform and smooth.
Key Words:air splicer;viscose yarn;splicing strength;orthogonal experiment;untwisting time;lap length;twisting time;splicing pressure
 
参考文献:
[1] 李丽君.捻接器捻接工艺参数的优化[J] .纺织器材,2008,35(3):44-47.
[2] 林庆泽.纤维捻接的机理研究及关键参数影响作用分析[D] .杭州:浙江理工大学,2012.
[3] 孙传芳,刘伟,刘勇军.提高新型纤维纱线捻接质量的生产体会[J] .棉纺织技术,2007,35(9):51-52.
[4] 林庆泽,吴震宇,胡旭东.空气捻接器纤维加捻机理的仿真与实验研究[J] .现代纺织技术,2012,20(1):20-23.
[5] 李国锋,李惠军.提高Espero-M型络筒机捻接质量的体会[J] .棉纺织技术,2012,40(11):47-49.
[6] 王丹.气动捻接器接头质量分析及其应用实践[J] .纺织机械,2011(6):37-40.
[7] 时香.空气捻接器接头质量的控制措施[J] .纺织器材,2018,45(5):33-34.


相关热词搜索:空气捻接器 粘胶纱

上一篇:夹持式导纱板的研发
下一篇:精梳机锡林转速与棉纤维断裂强度的理论模型研究

分享到: 收藏