梳棉机前后罩板安装及维修方法
2022-10-26 08:53:42   来源：   评论：0 点击：

  关键词：梳棉机；罩板；短轨；隔距；固定盖板；棉网清洁器；三角区
中图分类号：TS103.22⁺3          文献标志码：B          文章编号：1001-9634(2022)04-0024-03
 
收稿日期：2021-10-09
作者简介：李宝荣（1965—），男，江苏海安人，助理工程师，主要从事棉纺设备及工艺设计方面的工作。
   
Abstract:In order to solve the problem that the state of front and rear cover guard of card affects flat strips quantity and card sliver quality，the installation method of front and rear short rails and front and rear cover guard of card，the essentials of overhaul and replacement of front and rear cover guard and the matters needing attention are described in detail.It is pointed out that proper installation of front and rear short rails and front and rear cover guard，ensuring the accuracy of the gauge between them and cylinder needle surface，timely maintenance or replacement of unqualified cover guard，good control of the gauge between front cover gurad and doffer large cover shell，and the gauge between licker-in cover shell and rear cover guard are beneficial to the quality of carding sliver and good equipment condition.Stationary flat and cotton net cleaners should be installed at the front and rear cover guard of card according to the spinning materials.
Key Words:card；cover guard；short rail；gauge；stationary flat；cotton net cleaner；triangle area
 
参考文献：
[1] 纺织工业部生产司.梳棉机修理工作法[M] .北京：纺织工业出版社，1986.
[2] 李宝荣.A186型梳棉机曲轨的维修及安装[J] .棉纺织技术，2009，37(4)：40-42.
[3] 李宝荣.梳棉机盖板花异常的原因分析及对策[J] .棉纺织技术，2019，47(11)：38-41.