略论“短粗节”
2020-09-10 10:27:18   来源：   评论：0 点击：

 
摘要：为了解决生产中1 cm～2 cm短粗节频率高的问题，介绍短粗节纱疵种类及产生机理，详细分析牵伸过程中“人、机、料、法、环”使变速点改变是导致短粗节暴增的主要因素；简述伴随短粗节出现在布面上形成阴影或规律性条纹的表现形式，“特例”短粗节以及短粗节来去无踪的特性。指出：1 cm～2 cm短粗节相比长粗节、长细节危害性大；纺纱器材对短粗节的影响大于设备，外在因素不仅影响变速点，还会造成更加明显的纱疵使条干恶化。
关键词：纱疵分级；粗节；短粗节；牵伸纤维；变速点；胶辊；胶圈；罗拉；因素
中图分类号：TS104.2      文献标志码：B     文章编号：1001-9634(2020)04-0038-03
 
收稿日期：2019-12-08
作者简介：施宋伟（1964—），男，浙江黄岩人，工程师，主要从事纺纱工艺实践及信息化、智能化方面的应用研究。  
Abstract:In order to solve the problem of high frequency of 1 cm～2 cm short slubs in production,the types and mechanism of short slubs are introduced.The main factors causing the sharp increase of short slubs due to the change of accelerated point,which is caused by “human,machine,material,method and environment” in drafting process are analyzed.The forms of shadow or regular stripe formed by the short slubs appearing on the cloth surface,as well as the characteristics of “special case” short slubs and its characteristic of coming and going without trace are described.It is pointed out that the 1 cm～2 cm short slubs is more harmful than long slubs and long thins.The influence of spinning accessories on the short slubs is greater than that of the equipment.The external factors not only affect the accelerated point,but also cause more obvious yarn defects and make the evenness worse.
Key Words:yarn defects classification;slubs;short slubs;draft fiber;accelerated point;cot;apron;roller;factor
 
参考文献：
［1］ 郁崇文.纺纱工艺学［M］.上海：东华大学出版社，2015.
［2］ 欧怀林.总工谈纺纱——经典问答与专题案例［Z］.中国纱线网技术专辑，2014.
［3］ 谢家祥.几种细纱质量问题的分析与解决［J］.纺织器材，2018，45（5）：21-25.